Fumex

Replacement Filters for Indoor Air Purifiers and Fume Extractors

Replacement Filters for FA1 Mini / FA1-E-Mini / FA1-D-Mini

FA1 Mini Pre-filter

  • Woven Polyester Pre-filter
  • Application: Pre-filter
  • Filter Type: Woven Polyester
  • Efficiency: N/A

 

FA1 Mini Pre-filter

  • Application: Pre-filter
  • Filter Type: Panel Construction
  • Efficiency: MERV 11

 

FA1 Mini HEPA Filter

The 12” x 12” x 2” Fumex FA100-2 filter incorporates high performance HEPA media composed of borosilicate microfibers with an acrylic resin binder. This glass microfiber media is tested and certified at the manufacturer as meeting HEPA media standards with a DOP maximum smoke penetration of 99.97% efficient at 0.3 µm @ 10.5 ft/minute. The media is tested at the manufacturer to industry standards ASTM method F778-82 for permeability and the ASTM method D-2986 for DOP smoke penetration.

The 3D printer filter element incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass. A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board frame. Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.

  • Application: Filters Ultra-fine Particles (UFP) from 3D printers, laser printers, laser cutters; Laser markers & engravers
  • Filter Type: HEPA filter
  • Efficiency: 99.97% efficient at 0.3 µm

 

FA1 Mini Gas/Odor Filter

The 12” x 12” x 2” FA101D 3D printer filter & laser printer filter incorporates high performance bonded activated carbon technology designed for the removal of the gases/odors produced in 3D printing & laser applications. Bonded technology provides superior adsorption with minimal airflow resistance.

The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass.

A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board frame.

Filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.

  • Application: Gas / Odor; 3D printing & laser applications
  • Filter Type: Bonded activated carbon technology
  • Efficiency: N/A

 

Replacement Filters for FA1 / FA1-E / FA1-D

FA1 Pre-Filter

The Fumex FA102B filter incorporates a high performance spun bound polyester media and a high performance framed MERV 11 media housed in white .024” beverage board frames.

The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass. A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board frame. Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.

  • Application: Various
  • Filter Type: MERV 11
  • Efficiency: Pre-Filter

 

FA1 HEPA Filter

The 12” x 12” x 5.75” Fumex FA100 Replacement Filter incorporates high performance HEPA media composed of borosilicate microfibers with an acrylic resin binder. This glass microfiber media is tested and certified at the manufacturer as meeting HEPA media standards with a DOP maximum smoke penetration of 99.97% efficient at 0.3 µm @ 10.5 ft/minute. The media is tested at the manufacturer to industry standards ASTM method F778-82 for permeability and the ASTM method D-2986 for DOP smoke penetration.

The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass.

A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board frame.

Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.

  • Application: Ultrafine Particles (UFP) from 3D printing, laser printing, laser cutting, laser marking & engraving
  • Filter Type: HEPA filter
  • Efficiency: 99.97% efficient at 0.3 µm

 

FA1 Gas/Odor HEPA Filter

The 12” x 12” x 2” FA101D 3D printer filter & laser printer filter incorporates high performance bonded activated carbon technology designed for the removal of the gases/odors produced in 3D printing & laser applications. Bonded technology provides superior adsorption with minimal airflow resistance.

The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass.

A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board frame.

Filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.

  • Application: Gas / Odor; 3D printing & laser applications
  • Filter Type: Bonded activated carbon technology
  • Efficiency: N/A

 

FA1 SP Gas/Odor Filter

The 12” x 12” x 6” Fumex FA201D Replacement Filter incorporates high performance blended bonded carbon technology. Bonded technology provides superior adsorption with minimal airflow resistance.

The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass. A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board

Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.

  • Application: Gas / Odor
  • Filter Type: Bonded carbon technology
  • Efficiency: N/A

 

Replacement Filters for FA2 / FA2-E / FA2-D

FA2 – Pre-Filter

The Fumex FA140B-2 Replacement Filter incorporates high performance framed cellulose media. The filters will be housed in white .024” beverage board frames that consisting of 50 pleats. The pleats will have both inner and outer pleat lock.

The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass.

A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board frame. Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.

  • Application: Particulate
  • Filter Type: Pre-Filter
  • Efficiency: 99% efficient at 0.1 µm

 

FA2 HEPA Filter

The 12” x 12” x 5.75” Fumex FA100 Replacement Filter incorporates high performance HEPA media composed of borosilicate microfibers with an acrylic resin binder. This glass microfiber media is tested and certified at the manufacturer as meeting HEPA media standards with a DOP maximum smoke penetration of 99.97% efficient at 0.3 µm @ 10.5 ft/minute. The media is tested to NSF standards ASTM method F778-82 for permeability and the ASTM method D-2986 for DOP smoke penetration.

The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass.

A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board frame.

Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.

  • Application: High Efficiency Particulate
  • Filter Type: HEPA filter
  • Efficiency: 99.97% efficient at 0.3 µm

 

FA2 Gas/Odor Filter

The 12” x 12” x 6” Fumex FA201D Replacement Filter incorporates high performance blended bonded carbon technology. Bonded technology provides superior adsorption with minimal airflow resistance.

The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass. A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board

Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.

  • Application: Gas / Odor
  • Filter Type: Bonded carbon technology
  • Efficiency: N/A

 

Replacement Filters for FA5 / FA5-E / FA5-D

FA5 Pre-filter

The FA540B filter incorporates high performance framed cellulose media. The filters are housed in white .024” beverage board frames that consists of 100 pleats. The pleats will have both inner and outer pleat lock. The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps prevent air bypass. A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board frame. Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.

  • Application: Various
  • Filter Type: Pre-Filter
  • Efficiency: 95% efficient at 0.1 µm

 

FA5 HEPA Filter

The 18” x 18” x 4” FA500 3D fume filter incorporates high performance HEPA media composed of borosilicate microfibers with an acrylic resin binder. This glass microfiber media is tested and certified at the manufacturer as meeting HEPA media standards with a DOP maximum smoke penetration of 99.97% efficient at 0.3 µm @ 10.5 ft/minute. The media is tested at the manufacturer to industry standards ASTM method F778-82 for permeability and the ASTM method D-2986 for DOP smoke penetration.

The 3D printer/laser printer fume filter incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass. A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board frame. Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.

  • Application: Filters Ultrafine Particles (UFP) from 3D printers, laser printers, laser cutters; Laser markers & engravers
  • Filter Type: HEPA filter
  • Efficiency: 99.97% efficient at 0.3 µm at 10.5 ft/minute

 

FA5 Gas/Odor Filter Replacement Filter (for models FA5-E & FA5-D, 2 of these are used)

The 18” x 18” x 4” Fumex FA501D Replacement Filter incorporates high performance blended bonded activated carbon technology. Bonded technology provides superior adsorption with minimal airflow resistance.

The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass. A quick recovery, super-resilient polyurethane foam gasket is applied and the media is framed in a galvanized steel frame. Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.

  • Application: High Odor
  • Filter Type: Gas / Odor; 3D printing & laser applications
  • Efficiency: N/A

 

Replacement Filters for GS-100

FA2 Gas/Odor Filter

12” x 12” x 6” FA201D 3D printer filter & laser printer filter incorporates high performance bonded activated carbon technology designed for the removal of the gases/odors produced in 3D printing & laser applications. Bonded technology provides superior adsorption with minimal airflow resistance.

The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass. A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board

Filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.

  • Application: Gas / Odor; 3D printing & laser applications
  • Filter Type: Bonded activated carbon technology
  • Efficiency: N/A

 

Replacement Filters for GS2-200

FX7 Replacement Pre-Filter

  • Dimension – 12” x 12” x 1”
  • Construction – Spunbond polyester with tackifier
  • Efficiency – 35%@ 5 micron

 

FX1 Replacement Gas/Odor Filter

Fumex FX1 filter is specially designed for the treatment of gases and odors generated in many industrial processes.

Filter is constructed of chemical resistant polypropylene shell (12” x 12” x 12”) and each filter contains aprox. 25 lbs of carbon media.

 

Replacement Filters for GS3-200 / GS3-500

GS3-200 Pre-filter

The FA540B filter incorporates high performance framed cellulose media. The filters are housed in white .024” beverage board frames that consists of 100 pleats. The pleats will have both inner and outer pleat lock. The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps prevent air bypass. A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board frame. Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.

  • Application: Various
  • Filter Type: Pre-Filter
  • Efficiency: 95% efficient at 0.1 µm

 

GS3-200 / GS3-500 Replacement Filter (for above GS3 models, 3 of these are used together)

The 18” x 18” x 4” Fumex FA501D 3D printer filter & laser printer filter incorporates high performance bonded activated carbon technology designed for the removal of the gases/odors produced in 3D printing & laser applications. Bonded carbon technology provides superior adsorption with minimal airflow resistance.

The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass. A quick recovery, super-resilient polyurethane foam gasket is applied and the media is framed in a galvanized steel frame. Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.

  • Application: High Odor
  • Filter Type: Gas / Odor
  • Efficiency: N/A