HVAC

HVAC2018-07-30T20:49:04+00:00

Bruce Air Filter Company is proud to carry a wide variety of HVAC filters.  Please feel free to reach us via phone or email for further information or to place an order.

AIRGUARD PRODUCT INFORMATION

Airguard / Pleats

DP-G13een

DP / DP Max

PowerGuard

XTREME+Plus

DPHT – High Temperature

Type DPGT
Bio-Pure/Bio-Pure Max Pleat

DP HD

Airguard / (HVAC) Panels

F312
  • Disposable panel filter with fiberglass, skin backed media
  • Industrial strength
  • 1” and 2” depths available
  • Wide selection of standard sizes

P312
  • Disposable panel filter with synthetic media
  • Industrial strength
  • 1” and 2” depths available
  • Wide selection of standard sizes

Permanent Metal Filters

Airguard / (HVAC) Bags

Defiant

Venti-Pak
  • Ultrafine, high loft, microglass media
  • Wide variety of pocket lengths and counts
  • Fail safe mechanically staked pocket attachment
  • Double lock stitched pocket formation
  • Four efficiencies – MERV 15, MERV 13, MERV 12, MERV 11

Clean-Pak

Series AG Filter Elements
  • For use in Camfil HP Series
  • Deep pleated media design
  • Collapsible for compact shipping and storage
  • Three depths – 8″, 12″, 24″
  • Four efficiencies – 25-30%, 60-65%, 80-85%, 90-95%

Airguard / (HVAC) Boxes

Vari-Shield
  • Combined pre-filter and coalescer
  • Increased turbine output and reduced energy cost
  • Very low resistance to airflow – 0.24″ w.g. at 2,520 CFM
  • High dust holding capacity
  • Long filter life – fewer change-outs and less downtime
  • Proprietary, patented E-pleat technology
  • Lightweight construction
  • 100% moisture resistant media
  • Fully incinerable (no metal components)

Advantage
  • 2″ Mini-pleat design provides higher efficiency and dust holding
  • Optimal air flow ensures proper ventilation of occupied spaces
  • Durable plastic frame
  • No metal components; completely incinerable
  • Available with side and up/downstream gasketingMERV 16/14A in accordance with ASHRAE Test Method 52.2 – 2012, Including Appendix J
  • Fully incinerable (no metal components)

Legacy QuadSEAL
  • MERV 14
  • Molded foam polyurethane frame features a quad-seal integrated gasket
  • Duel gasket ribs provide duel sealing protection against bypass
  • Media pack is fully potted into the frame
  • Utilizes LoadTech® proprietary embossed pleated synthetic media
  • Moisture, chemical and corrosion resistant frame is able to flex without damage
  • Classified per UL Standard 900 for flammability
  • Earn points toward LEED Certification
  • Available in 4” depths

Legacy LoadTech
  • 4”, MERV 14
  • Holds 2X more dust with 100% synthetic, exclusive, blue media with ourLoadTech Embossed Design 
  • Longer filter life and fewer filter change-outs with higher dust holding capacity
  • 12″ filter performance in a 4″ filter
  • Cost savings – reduced energy costs with low pressure drop and low energy consumption
  • Simplified handling and easy installation –plus reduced storage space, less weight and lower shipping costs
  • Completely incinerable with high impact plastic frame
  • Earn points toward LEED Certification

Legacy

Variflow
  • Ultrafine microglass paper media
  • Moisture resistant construction
  • Single header, double header, no header models
  • Metal and wood cell sides
  • 6” and 12” depths available
  • Corrugated aluminum separators
  • Three efficiencies – 90-95%, 80-85%, 60-65%
  • MERV 15 models can earn points in support of registered LEED project certification

Variflow SC

Variflow HT
  • For High Temperature Applications
  • High efficiency microglass paper media
  • Completely rigid, metal box construction
  • Single header construction (standard), double header (optional)
  • Cross braces and faceguards on both sides
  • 6” and 12″ depths available
  • 24 gauge aluminized steel cell sides
  • High temperature glass wrap sealant
  • Three temperature ranges – 500°F, 750°F, 900°F
  • Three efficiencies – 90-95%, 80-85%, 60-65
Variflow Compact Series
  • Ultrafine microglass paper media
  • Aluminized steel cell sides
  • Box construction – No header
  • 2” and 4” depths available
  • Corrugated aluminum separators
  • High temperature operation up to 750°F
  • Three efficiencies – 90-95%, 80-85%, 60-65%
Variflow II-M
  • Galvanized steel cell sides
  • Box construction – No header
  • 2” and 4” depths available
  • Adhesive bead separators
  • Two efficiencies – 90-95%, 60-65%

Variflow II-MC

  • Galvanized steel cell sides
  • 13/16″ header on air entering side
  • Skip bead, mini-pleat adhesive separators
  • For side access applications
  • 4” depth available
  • Two efficiencies – 90-95%, 60-65%
V-FORCE
  • All plastic construction
  • 100% synthetic media
  • Moisture and chemical resistant
  • Fully incinerable
  • Low resistance
  • Three efficiencies – MERV 14, MERV 13, MERV 11

Vari-Pak
  • Ultrafine high loft microglass media
  • Pleated construction with pleat stabilizers (fingers) on both sides
  • Galvanized steel cell sides
  • Box construction (no header) and header models
  • 6” and 12” depths available
  • Four efficiencies – MERV 14, MERV 13, MERV 11, MERV 10

Vari-Pak Model S

Vari-Pak GT
  • For Turbine Intake Applications
  • High loft fiberglass or synthetic media
  • Expanded metal pleat support
  • Pleat support stabilizers on both sides
  • Three efficiencies – MERV 14, MERV 13, MERV 11
Duraflow

Vari+Plus
  • Ultrafine microglass paper media
  • Moisture resistant construction
  • Mini-pleat adhesive bead separators
  • V-bank assembly of mini-pleat media packs
  • Large media area, low resistance
  • Five efficiencies – MERV 16 DOP, MERV 16, MERV 14, MERV 13, MERV 11

Vari+Plus VP
  • Suitable for HVAC or Turbine Intake Applications
  • All plastic construction
  • Revolutionary, exclusive, DURA-TUFF™ synthetic media
  • Fully incinerable
  • V-bank assembly of mini-pleat media packs
  • No rivets, screws or faceguards
  • Two efficiencies – MERV 15, MERV 13
  • Also available with Microglass media

Vari+Plus MC
  • High efficiency microglass paper media
  • Completely rigid design
  • 24 gauge galvanized steel cell sides
  • Mini-pleat packs with high media area – up to 300% more media
  • Moisture resistant
  • Pre-punched holes accept standard 12″ spring clips
  • Four efficiencies – MERV 16, MERV 14, MERV 13, MERV 11
  • Also available with Microglass media
Vari+Plus GT
  • For Turbine Intake Applications
  • Ultrafine microglass paper media
  • Mini-pleat adhesive bead separators
  • V-bank assembly of mini-pleat media packs
  • Two efficiencies – MERV 14, MERV 11
  • Available with Vari-Pad direct mount pocket style prefilter
Vari-Pad
  • Mounts directly onto Airguard Vari+Plus GT high efficiency barrier filters
  • Installed in the reverse flow orientation
  • Extends barrier filter life
  • Space saving design

Airguard / (HVAC) Pads, Rolls, & Media Frames

GT-Pads
  • Mounts directly onto high efficiency barrier filters
  • Also used as an independent filter
  • Manufactured from spun fiberglass strands
  • Fiberglass (4”)
Permalast Media
  • Heavy weight fiber media
  • 1”, 2” depths available
  • Rigid, self-supporting
  • Washable
  • 50-65% arrestance
Service Frame
Specialty Medias
  • Select from a variety of media and filters for specialized equipment or applications
  • Lint and ink mist collection
  • Replacements for AAF PL-24 and Auto-Airmat
  • Special application media
  • Sales Brochure
Automatic Roll Filter Media

Choose from six styles of media to fit major brands of auto roll equipment, including: Airguard, AAF, BLC, Cambridge, Camfil, Carrier, Commercial, Continental, Trane

  • Sales Brochure
  • Core Identification Guide

    Fiberglass Medias:

    • Progressive density media construction
    • 2-1/2″ thick
    • Scrim mesh netting backing for high tensile strength
    • Adhesive coated for high dust holding capacity
    • 70-90% arrestance

    Synthetic Medias:

    • 1/2″, 1″ depths available
    • Scrim mesh netting backing for high tensile strength
    • Dry and tackified medias
    • 70-90% arrestance
  • Bio-Pure
    • Pads, bulk rolls, panels and links available
    • Antimicrobial treated and tackified media
    • 85 – 90% arrestance

    Airguard / (HVAC) HEPAs

    MicroPleat Disposable Ducted Ceiling Modules
    • Anodized extruded aluminum construction
    • 2′ x 2′ and 2′ x 4′ sizes
    • Low profile design – 5″ deep, fits into T-bar ceiling grid
    • Fixed or adjustable diffuser/damper
    • Three efficiencies – 99.99% and 99.999% on .3 microns; 99.9995% on .12 microns
    Micro Guard LR
    Micro Guard 2000 Separator Style
    Micro Guard O/M
    • Specially designed for use as the final filter in oil mist collection equipment
    • Ultrafine microglass paper media
    • Galvanized, aluminum and fire retardant particle board construction
    • 95% efficient on .3 micron particles
    Micro+Plus Bio-Tech
    • Replaceable filter ceiling modules
    • Low profile design
    • Aluminum or stainless steel housing
    • All welded construction
    MicroPleat Mini-Pleat Style Filters
    • Ultrafine microglass paper media
    • Anodized extruded aluminum cell sides
    • Gasket seal, gel seal and knife edge models
    • Continuous bead mini-pleat adhesive separators
    • Four efficiencies – 99.97%, 99.99%, and 99.999% on .3 microns; 99.9995% on .12 microns
    Micro-V 2000 Mini-Pleat Style

    Airguard / (HVAC) Gas Phase

    Fresh Air
    • Combination media removes particulate plus gases and odors
    • 100% synthetic pre-filter charged media
    • MERV 7
    • Activated carbon media containing 200 grams per square meter provides long lasting odor removal
    • Self-supported media requires no metal backing for improved incinerability and disposal
    • 1”, 2”, 4” depths available
    Fresh Air Supreme
    • Combination media removes particulate plus gases and odors
    • 100% synthetic pre-filter charged media
    • MERV 8
    • Impregnated carbon removes dust fumes, new furnishing odors, acid gases, VOC’s
    • Self-supported media requires no metal backing for improved incinerability and disposal
    • 2” and 4” depths available
    IAQ-99
    • Combination polyester pre-filter with carbon bonded fibers
    • 300 grams of carbon per square foot of media (2″)
    • Available in die cut beverage board frame or pad design
    • 1” and 2” depths available
    IAQ-100 Series
    Vari-Pure
    • High capacity activated carbon filters
    • Select from activated carbon, impregnated carbon, potassium permanganate or blended media
    • Effective on a wide variety of gases and odors
    • Vari-Pure Lite available for lighter odor concentrations
    • Vari-Sock after-filter prevents carbon dusting downstream
    • 12″ deep
    Vari-Klean
    • Ultra high efficiency gas phase adsorbers
    • Highest first pass removal efficiency
    • Highest carbon loading
    • Highest activity carbon
    • Low resistance
    • Long service life
    • Clean operation, no dusting
    • Easy to retrofit with standard filter hardware
    • Two styles to choose from
    • Filters individually packaged in a poly bag
    • Select from four medias
    Replacement Trays & Elements
    Refillable Carbon Trays
    AG-12 Element
    AG-18 Element
    • Fits AG-22 element and Purafil PC-22 housings
    • Refillable and disposable models
    • Contains 18 pounds of carbon
    • Convoluted carbon cell
    • Refillable module
    • Replaces B-S filter fold
    • Contains 45 pounds of carbon
    Carbon Filter Housings
    AG-2000 Front Access Housing
    • 14 gauge cold rolled steel construction
    • Easily removable access grid
    • Contains 90 pounds of carbon (10 trays)

    AG-144 Carbon Housing

    • 16 gauge cold rolled steel construction
    • Holds four IAQ-100 carbon panels
    • Built-in pre-filter and final filter tracks
    • Contains 48 pounds of carbon

    AG-22 Carbon Housing

    • 16 gauge cold rolled steel construction
    • Holds four AG-18 carbon elements
    • Contains 72 pounds of carbon

    Airguard / HVAC Foremarket Products

    Uni-Lok
    • 6 gauge aluminized steel
    • 6 standard sizes
    • Pre-punched for assembly into built-in frame banks
    • Full line of latches to secure various sizes and designs of air filters
    Type AG-8 Frame
    Type HDS HEPA Filter Holding Frame
    Flat Bank Housing
    V-Bank Housing
    Two Stage Housing
    Carbon Filter Housing
    HEPA Lock Housing
    • Other housings available upon request
    • Bag-in/Bag-out Housing
    • ASHRAE Filter Lock Housing
    • Moisture Separator Housing

    POWER GENERATION

    Coalescer Filters

    Moisture-Stop

    • Reduced energy costs – very low initial resistance: 0.02″ w.g. (5 Pa)
    • Cost savings – extends filter life
    • Critical protection – prevents damage to expensive downstream equipment
    • Elastic fiber structure – low compressibility and graduated density enhances the separation efficiency
    • Available in pre-cut pads and bulk roll media; holding frames also available
    • Filter Depth: 3″ deep (70 mm)
    • Density per unit area: 300 g/m2
    • Operational temperature rating of up to 250°F (120°C)
    Vari-Shield
    • Combined pre-filter and coalescer
    • Increased turbine output and reduced energy cost
    • Very low resistance to airflow – 0.24″ w.g. at 2,520 CFM
    • High dust holding capacity
    • Long filter life – fewer change-outs and less downtime
    • Proprietary, patented E-pleat technology
    • Lightweight construction
    • 100% moisture resistant media
    • Fully incinerable (no metal components)

    Pre-Filters

    GT-Pad

    • 4″ fiberglass media with high density
    • Mounts directly onto barrier filters with the GT pre-filter retaining grid or can be used as an independent filter with the GT frame assembly
    • High viscosity gel adhesive throughout entire depth of media for dirt load retention and prevention of migration of particulate off fiberglass strands
    • Designed for high dust holding capacity in very high dirt loading conditions
    • Initial resistance 0.42″ w.g. (105 Pa)
    • Available in pre-cut pads

    Vari-Pad

    • Mounts directly onto Vari+Plus GT filters for both standard and reverse airflow configurations
    • Heavy duty construction – custom fitted, produced from thermally bonded, multi-denier polyester fibers with the proper balance of fiber density and compression strength
    • Increased high dust holding capacity extends filter life and reduces annual maintenance costs
    • Space saving design eliminates the need for a separate, free-standing filter bank
    • Initial resistance: 0.59″ w.g. (148 Pa)
    • Operational temperature rating of up to 220° F (104°C)

    DP-GT

    • Heavy duty construction to maintain pleat stability in difficult operating conditions
    • 100% synthetic media with moisture resistant beverage board frame
    • Perfect for use in high velocity systems or harsh operating conditions including turbulence or heavy dirt loading
    • MERV 8
    • 2″, 3½” and 4″ depths available
    • Initial resistance of 4″: 0.26″ w.g. (65 Pa) at 2,500 CFM
    • Operational temperature rating of up to 200° F (93°C)

    Barrier Filters

    Vari+Plus GT

    • Ultrafine microglass paper media
    • Mini-pleat adhesive bead separators
    • High breach strength up to 30″ w.g. (7,500 Pa)
    • V-bank assembly of mini-pleat media packs
    • MERV 14, MERV 11
    • Use with Vari-Pad direct mount pocket style pre-filter
    • High efficiency, high capacity
    • Low operating resistance produces enormous energy cost savings
    • Operational temperature rating of up to 180° F (82°C)

    Vari+Plus VP-GT

    • All plastic construction – moisture and chemical resistant and fully incinerable
    • V-bank assembly of mini-pleat media packs
    • Dura-Tuff 100% synthetic media is water resistant and extremely durable
    • Media is not effected by humidity or moisture and resists tearing and abrasion
    • High dust holding capacity and long service life with dual-layer media construction
    • High breach strength up to 25″ w.g. (6,250 Pa)
    • No rivets, screws or faceguards
    • MERV 15, MERV 11
    • Low operating resistance minimizes the loss in power output caused by the filter
    • Low operating resistance produces enormous energy cost savings
    • Operational temperature rating of up to 180° F (82°C)

    Duraflow

    • Ultrafine microglass paper media with corrugated aluminum separators
    • 24-gauge galvanized steel construction with expanded faceguard on both sides
    • High breach strength up to 25″ w.g. (6,250 Pa)
    • MERV 15, MERV 11
    • High dust holding capacity, long service life and low operating cost
    • Durable and reliable in wet operating conditions with water repellent binder
    • Full media pack sealant prevents leakage and fouling, erosion of turbine blades
    • Operational temperature rating of up to 350° F (177°C)

    Vari-Pak GT

    • High loft media, fiber glass or synthetic
    • Pleated with an expanded metal backing
    • Metal fingers on both sides of filter stabilize the pleats
    • Media pack is reinforced with expanded metal faceguards
    • MERV 14, MERV 13, MERV 11
    • Operational temperature rating of up to 180° F (82 °C)

    ATI PRODUCTS

    HT Panel
    The Activator Series
    Series N
    • Ring panels and links available
    • 2-ply MERV 6 available
    • Self-sealing – no latches required
    • Tackified media increases particle retention

    Slip-On
    Three styles available:
    • Cut-to-size panels with reusable wire frame
    • Replacement sleeves – no frame
    • Service Rolls – cut your own sleeves
    • Self-sealing, no latches required
    CA Panel
    • Air Flow 300 FPM
    • Initial Static .21” W.G.
    • Efficiency Rating: 92.7%
    Ultra II Bag
    Ultra LT Bag
    • Air Flow 300 FPM
    • Initial Static .24” W.G.
    • Efficiency Rating: 92.7%
    HT Bag
    SynPak
    • Self-supported pocket filters
    • Three Ply media construction
    • 2, 3 or 4 pockets available in 15″ depth
    • MERV 8
    Streamline Media
    • Synthetic air filter media
    • Made from multi-denier, recycled polyester fibers
    • 1/2″, 1″ or 2″ depths available
    • Tackified media increases particle retention
    • 85 – 95% arrestance

    Foam Media
    • 1/4″, 1/2″, 1″ thicknesses
    • Washable
    • Operates at -50ºF to 250ºF
    • 60 – 70% arrestance

    Purolator Products

    Puro-g13een

    Defiant Mark80-D

    Hi-E 40

    Hi-E 40 I
    • Perimeter frame is constructed of UL approved non-flammable board
    • Media is bonded upstream and downstream to diagonal support elements
    • 1/8″ thick media
    • Media is high density
    • Ultra-fine fiberglass media reinforced by a woven fiberglass mesh
    • MERV 8
    • 90-93% average arrestance
    Hi-E 40 H
    • MERV 8
    • Specially constructed for use in systems involving elevated operating temperatures
    • Perimeter frame is constructed of 24 gauge aluminized steel
    • Pleated element is supported downstream by a 24 gauge expanded aluminized steel face guard
    • Filter media is ¼” thick, high-density ultra-fine fiberglass reinforced by a woven fiberglass mesh
    • Constructed to operate at 400 degrees F continuously and may be subjected to temperatures up to 450 degrees F for short durations of not more than 10 minutes
    Mono Pleat
    • One-piece wrap around chipboard frame
    • Filter element is mechanically bonded to the frame by a thermal plastic sealant activated by applied heat and pressure
    • Economical, high capacity medium efficiency filter
    • Designed for applications where 1″ disposables are effective

    PAF 11

    P25: Honeywell F25 Replacement Cartridge
    • Equal to or better than original equipment performance
    • Delivers up to 98% efficiency on 5 micron and larger particles
    • Reduces dust accumulation on household furniture
    • Unique face board design lowers initial static pressure
    • Sizes available = 16″ x 25″ x 5″, 20″ x 25″ x 5″, and 20″ x 20″ x 5″

    P5 / Purolator 2000
    • Replacement filter for Trion Air Bear®
    • Reduces dust accumulation, allergy causing irritants
    • Expanded Metal Support Grid
    • Moisture resistant beverage board frame
    • Size available = 20″ x 25″ x 5″
    P1200
    • Replacement filter for Trion Air Bear 1200TM®
    • Effectively reduces pollen, dust, mold spores, pet dander
    • Lofted, non-woven cotton/synthetic media
    • Increases filtration efficiency
    • Size available = 16″ x 25″ x 3″
    Defiant Mark80-HD
    SERVA-Pak S
    SERVA-Pak
    • Ultrafine, high loft, microglass media
    • Wide variety of pocket lengths and counts
    • Fail safe mechanically staked pocket attachment
    • Double lock stitched pocket formation
    • Four efficiencies – MERV 15, MERV 13, MERV 12, MERV 11
    Hi-E Series Pleated Collapsible Cartridge
    • Deep pleated media design
    • Collapsible for compact shipping and storage
    • Three depths – 8″, 12″, 24″
    • Four efficiencies – 25-30%, 60-65%, 80-85%, 90-95%
    PRIME ONE
    • 2” deep mini-pleat filter
    • Provides outstanding particulate removal efficiency and service life
    • Ideal for any application where 2” pleated filters are currently in use
    • MERV 16/14A for improved air quality in occupied spaces without significant reduction in air flow

    DOMINATOR QuadSEAL
    • MERV 14
    • Molded foam polyurethane frame features a quad-seal integrated gasket
    • Duel gasket ribs provide duel sealing protection against bypass
    • Media pack is fully potted into the frame
    • Utilizes LoadTech® proprietary embossed pleated synthetic media
    • Moisture, chemical and corrosion resistant frame is able to flex without damage
    • Classified per UL Standard 900 for flammability
    • Earn points toward LEED Certification
    • Available in 4” depths
    DOMINATOR LoadTech
    • 4”, MERV 14
    • Holds 2X more dust with 100% synthetic, exclusive, blue media with ourLoadTech Embossed Design 
    • Longer filter life and fewer filter change-outs with higher dust holding capacity
    • 12″ filter performance in a 4″ filter
    • Cost savings – reduced energy costs with low pressure drop and low energy consumption
    • Simplified handling and easy installation –plus reduced storage space, less weight and lower shipping costs
    • Completely incinerable with high impact plastic frame
    • Earn points toward LEED Certification
    DOMINATOR

    AERO Cell
    • Medium and high efficiency rigid air filter
    • Box filter construction eliminates the need for retainer and special external wire media supports
    • Perimeter frame is constructed of high strength, corrosion resistant galvanized steel
    • Beverage board die cut faceplates are bonded to both the air entry and exit sides to maintain filter integrity
    • Utilizes a high-density filter media composed of ultra-fine glass fibers laminated to reinforced, high strength nylon backing
    • All plastic components
    • 100% synthetic media
    • Ideal for the most demanding operating conditions, including variable air volume systems, high air flow, turbulence, repeated fan shut down, high moisture, and some chemical or corrosive conditions

    AERO Cell S

    DEFIANT Cell
    • Media has multiple top performance characteristics to provide optimum filter service life
    • Lower maintenance and energy costs
    • Manufactured for system applications requiring constant or Variable Air Volume systems including hospitals, health care facilities, food-processing plants, pharmaceutical manufacturing and telecommunications

    SERVA-Cell

    SERVA-Cell 2VS
    • An excellent option for applications currently using rigid cell style extended surface filters
    • Replacement for corrugated separator style or supported pleat style rigids
    • All plastic construction
    • Made of 100% synthetic media
    • Fully incinerable
    • Moisture and chemical resistant
    • Low in resistance and light weight
    SERVA-Cell VA
    SERVA-Cell VA GT
    SERVA-Cell Gas Turbine (GT)
    SERVA-Cell PV
    • Offers the benefits of ASHRAE filtration performance
    • Lightweight materials and industrial strength construction
    • Able to withstand nominal air flow of 750 FPM
    • All plastic frame construction allows it to be user friendly
    • Frame is lighter and completely disposable through incineration

    SERVA-Cell High Temp
    • Rigid box, high efficiency filter
    • Extended surface ASHRAE rated air filter
    • Built specifically for environments with elevated operating temperatures up to 750°F
    • Recommended airflow rate: 500 FPM (625 FPM maximum)
    ULTRA-Cell High Efficiency HEPA
    • Aluminum separator style High Efficiency Particulate Air (HEPA) filter
    • Ranging efficiencies on .3 micron
    • Available in multiple constructions for gasket seal, fluid seal, high capacity, and high temperature applications
    • Frame material options include fire-retardant and non-fire-retardant particleboard, fire-retardant and non-fire-retardant plywood, 304 stainless steel and 16 gauge galvanized steel
    • Compliments the Purolator housings
    ULTRA-Cell V-Pleat
    • High efficiency mini-pleat separator, fluid seal style filter, designed to operate at 500 FPM
    • Manufactured for environments requiring 99.97% or 99.99% efficiency on .3 micron particles
    • Classified per UL Standard 900 for flammability
    MICROPAK Mini Pleat
    MICROPAK Disposable Module
    • Ducted supply module designed for cleanroom applications
    • Designed for cleanrooms, laboratories, or any controlled area requiring clean air from Class M 6.5 (100,00) ISO 14644 Level 8 to Class M 1.5 (1) ISO 14644 Level 3
    • Efficiencies ranging from 99.99% on .3 micron particles to 99.9995% on .12 micron
    • Tested for pressure drop and scan tested for pinhole leaks
    • Lightweight, low profile
    • Constructed out of anodized aluminum on the filter cell side
    • Mill finish aluminum plenum back
    • All modules have a centerboard and one port (standard) to measure static pressure and adjust the diffusion plate

    MICROPAK Permanent Hood
    • Designed for cleanrooms requiring clean air from Class M6.5 (100,000) to Class M1.5 (1)
    • Gel seal filter
    • Can be installed or removed from the Cleanroom side without removing or disturbing the hood assembly
    ULTRA-Cell LR
    Cut-It-Yourself Pads
    • Offers ease of installation and convenient disposal
    • Four popular media options: Synthetic foam (with or without plastic backing), fiberglass or aluminum
    • Washable and reusable (except fiberglass)
    • Just measure, cut and install
    Permalast Media
    • Heavy weight fiber media
    • 1″ and 2″ depths available
    • Rigid, self-supporting and washable
    • 50 – 65% arrestance
    Automatic Rolls

    Choose from six styles of media to fit major brands of auto roll equipment, including: Airguard, AAF, BLC, Cambridge, Camfil, Carrier, Commercial, Continental, Trane

  • Sales Brochure
  • Core Identification Guide

    Fiberglass Medias:

    Progressive density media construction
    2-1/2″ thick
    Scrim mesh netting backing for high tensile strength
    Adhesive coated for high dust holding capacity
    70-90% arrestance

  • Fiberglass Media Product Bulletin

    Synthetic Medias:

    1/2″, 1″ depths available
    Scrim mesh netting backing for high tensile strength
    Dry and tackified medias
    70-90% arrestance

  • Synthetic Media Product Bulletin
  • Fiberglass Media
    • Select from several grades
    • 1″ and 2″ depths
    Bio-Pure
    • Pads, bulk rolls, panels and links available
    • Antimicrobial treated and tackified media
    • 85 – 90% arrestance
    Service Frames
    Hi-E 40 CB
    • Medium efficiency
    • Self-supported
    • Extended surface pleated air filter
    • Effective in stand-alone applications or as a pre-filter in place of a disposable, permanent, or media pad/frame filter
    • 1”, 2”, 4” depths available
    PURO Cell
    • Rigid box-type filter
    • Medium and high-efficiency filtration combined with odor control
    • Carbon-loaded pleats clean the air by removing airborne molecular contaminants present at levels less than one particle per million

    URO Seal Carbon Refillable Tray
    • Provides dual filtration of particulate and odor adsorption
    • Available for vapor or liquid phase filtration
    PURO HEPA Holding Frame
    • 16 gauge galvanized steel or Type 304 stainless steel
    • Flush mitered/welded corners
    • Manufactured to support use in a variety of HVAC applications
    ASHRAE Puro Frames & Clips
    • 16 gauge galvanized steel or Type 304 stainless steel
    • Flush mitered/welded corners
    • 8 clip styles available

    Residential

    Indoor air quality is a major concern in today’s society. EPA studies shows that air inside your home can be 5X more polluted than air outside your home. Purolator provides quality air filtration products for use in residential heating and air conditioning systems to improve the quality of air you breathe. Purolator air filter products range from the classic fiberglass air filter to the rugged 10-year electrostatic adjustable air filter. Find Purolator products in retail stores, hardware wholesalers, food and drug companies, and more.

    P5/Purolator 2000
    • Replacement filter for Trion Air Bear®
    • Reduces dust accumulation, allergy causing irritants
    • Expanded metal support grid
    • Moisture resistant beverage board frame
    • Available in 20” x 25” x 5”, 16” x 25” x 5”, 20” x 20” x 5”
    • Available in three efficiencies: MERV 8, 11, and 13
    P1200
    • Replacement filter for Trion Air Bear 1200TM®
    • Effectively reduces pollen, dust, mold spores, pet dander
    • Lofted, non-woven cotton/synthetic media
    • Increases filtration efficiency
    • Available in 16” x 25” x 3”
    MPSG Series/Replacement for Space-Gard Micropleat
    • Increases longevity of HVAC systems when properly used and maintained
    • Designed for home and light commercial use for removal of 99% of particles 5 microns and larger
    • Improves air quality in the home
    P25/Replacement for Honeywell F25
    • Equal to or better than original equipment performance
    • Delivers up to 98% efficiency on 5 micron and larger particles
    • Reduces dust accumulation on household furniture
    • Unique face board design lowers initial static pressure
    • Available in 20” x 25” x 5”, 16” x 25” x 5”, 20” x 20” x 5”
    F312
    • Disposable panel filter with fiberglass, skin backed media
    • Industrial strength
    • 1” and 2” depths available
    • Wide selection of standard sizes
    P312
    • Disposable panel filter
    • Synthetic media
    • Industrial strength
    • 1” and 2” depths available
    • Wide selection of standard sizes
    Permalast
    • Heavy weight fiber media
    • 1/2”, 1”, 2” depths available
    • Rigid, self-supporting and washable
    • 50-65% arrestance
    Cut-to-Fit
    • Fiberglass, Metal, Synthetic 2 Pack, Foam with Plastic Grid Support
    • Fits practically all models of window air conditioning units
    • Trim with household scissors
    • Washable/reusable (except fiberglass)
    • Easy disposal
    • Arrestance 70-80%
    • Packaged: 24/carton
    Hammock Pads
    • Blue/white rigid fiberglass with light lamination on downstream side
    • Designed for residential, light industrial and commercial applications
    • Arrestance 70%
    • Packaged: 24/carton
    Glass Utility Rolls
    • Blue/white rigid fiberglass with light lamination on downstream side
    • Designed for residential, light industrial and commercial applications
    • Arrestance 70%
    • Packaged: 1/carton