SPECIALTY PRODUCTS

//SPECIALTY PRODUCTS
SPECIALTY PRODUCTS 2018-06-04T15:21:25+00:00
We carry multiple lines of Specialty Products including ATI Paint Spray Booth Products, NESHAP Filtration Products, NuCalgon Products, Timken V-Belts, and more.  Please feel free to reach us via phone or email for further information or to place an order.

 

(ATI) Paint Spray Booth Products

Diffusion Max

  • Helps to equalize airflow across the paint booth for a perfect finish
  • Available in three grades: ATI-600, ATI-300 and ATI-1
  • ATI-500 Pockets and Panels
  • Average Paint Spray Removal Efficiency 99.79%
  • High Paint Holding Capacity
  • Panels and Bags (bags available in two and three pocket models)

Channel Media

  • Air Flow 150 FPM
  • Initial Static .05″ W.G.
  • Average Paint Spray Removal Efficiency 99.79%
  • High Paint Holding Capacity
  • Pads and Blankets cut to size

Ultra II Filter

  • Air Flow 150 FPM
  • Initial Static .05″ W.G.
  • Average Paint Spray Removal Efficiency 99.70%
  • Pads and Blankets cut to size
  • Bags available in two and three pocket models

Ultra Media

  • Air Flow 150 FPM
  • Initial Static .05″ W.G.
  • Average Paint Spray Removal Efficiency 99.76%
  • Pads and Blankets cut to size
  • Bags available in two and three pocket models

Tack Media

  • Same media as ATI Ultra Media but with tackifier added on the downstream side
  • Air Flow 150 FPM
  • Initial Static .05″ W.G.
  • Average Paint Spray Removal Efficiency 99.76%
  • Pads and Blankets cut to size
  • Bags available in two and three pocket models

Red Media

  • Air Flow 150 FPM
  • Initial Static .05″ W.G.
  • Average Paint Spray Removal Efficiency 99.66%
  • Pads and Blankets cut to size

CS Media

  • Air Flow 150 FPM
  • Initial Static .08″ W.G.
  • Average Paint Spray Removal Efficiency 99.48%
  • Pads and Blankets cut to size
  • Bags available in two and three pocket models

PR Media

  • Air Flow 150 FMG
  • Initial Static .03″ W.G.
  • Average Paint Spray Removal Efficiency 92.4%
  • Pads and Blankets cut to size
  • Bags available in two and three pocket models

(SPECIALTY PRODUCTS) NESHAP Filtration Products

ATI-500 Pockets and Panels

  • Average Paint Spray Removal Efficiency 99.79%
  • High Paint Holding Capacity
  • Panels and Bags (bags available in two and three pocket models)

OSM-100 System

  • The ATI OSM-100 System is the original NESHAP filter system tested under the 319 method for existing paint booths.
  • The OSM-100 is a two-stage system consisting of a pre-filter pad followed by a two pocket bag filter. It is a self-sealing and self-supporting system that allows upgradingyour existing paint booth overspray collection system without any structural modifications. The OSM-100 system is especially effective on high solids paints.
  • First Stage – The Ultra™ pre-filter pad (purple and white) is a two ply media with a more open fiber structure on the air entering side and a finer fiber structure on the air leaving side to enhance depth loading of paint overspray and prevent face loading on the filter. Depth loading substantially increases paint holding capacity.
  • Second Stage – The OSM-100 two pocket bag filter (yellow and white) is a four ply product consisting of a two layer media with graduated density fiber construction on the air entering side and a needled fiber media on the air leaving side with a latex foam backing for excellent particle retention on smaller particles. The OSM-100 bag can exceed NESHAP requirements for efficiency even without the pre-filter.

OSM-200 System

  • The ATI OSM-200 System is NESHAP compliant tested under the EPA Method 319.
  • The OSM-200 is a two-stage system consisting of an Ultra pre-filter media pad or blanket followed by a OSM-200, 4-ply self supported multi-pocket filter.
  • First Stage – The Ultra pre-filter (installed in pad or pre-cut blanket form) is a two ply media with a more open fiber structure on the air entering side and a finer fiber structure on the air leaving side to enhance depth loading of paint overspray and prevent face loading on the filter. Depth loading substantially increases paint holding capacity.
  • Second Stage – The final filter is a four ply self supported OSM-200 pocket filter consisting of a two layer media with graduated density fiber construction on the air entering side along with an added tackifier on the air leaving side of the pre-filter layer. The final layer is a tightly needled fiber media on the air leaving side for particle retention. The OSM-200 bag can exceed NESHAP requirements for efficiency even without the pre-filter.
Test Method 319:

A-3000 System

  • The ATI A-3000 System is the NESHAP system of choice for new paint booths.
  • The A-3000 is a three-stage system consisting of a pre-filter pad, followed by a two pocket bag filter, followed by a five pocket bag filter. The A-3000 system is ideal for a VOC incineration system or in a painting or de-painting recirculation system where almost total elimination of particulate is required.
  • First Stage – The Ultra pre-filter pad (purple and white) is a two ply media with a more open fiber structure on the air entering side and a finer fiber structure on the air leaving side to enhance depth loading of paint overspray and prevent face loading on the filter. Depth loading substantially increases paint holding capacity.
  • Second Stage – The OSM-100 two pocket bag filter (yellow and white) is a four ply product consisting of a two layer media with graduated density fiber construction on the air entering side and a needled fiber media on the air leaving side with a latex foam backing for excellent particle retention.
  • Third Stage – The A-3000 five pocket bag filter is a multi-layer product made with an open fiber layer on the air entering side followed by a multi-ply synthetic fiber media on the air leaving side with a spun bonded scrim backing. The A-3000 bag exceeds the NESHAP requirements for efficiency even without the first two layers.

Permatron – Washable Furnace Filters

DustEater® Washable Electrostatic Air Filters

The DustEater series includes two models to choose from, depending on your air filtration needs:

The DustEater® air filter series is proven in independent laboratory testing to provide highly efficient system-wide air filtration with low resistance to airflow. Standard disposable filters trap only very large particles. Not only are these filters less efficient but they tend to clog, restricting air flow which results in increased heating and cooling costs. DustEater air filters are environmentally friendly with no disposable parts.

The DustEater air filter series carries a lifetime warranty.

DustPlus® Particulate and Odor/Fume Air Filter

  • Dual action air cleaning ability is available in one electrostatic air filter  Particulate plus odor/fume removal is offered with our DustPlus (Model DP).  The DustPlus air filter contains a woven synthetic front panel, which carries a permanent electrostatic charge to attract and hold airborne particulates. The interchangeable back panel (afterfilter) consists of activated carbon media, which adsorbs noxious odors/fumes. The disposable activated carbon afterfilter (Model CH150) is available in a 4-pack.  Depending on odor and fume levels, this panel should be changed every 3-4 months in the average household.
  • The DustPlus air filter (permanent prefilter) carries a lifetime warranty.
  • DustPlus Activated Carbon Air Filter Features A Proven Air Filter Design
  • Permatron’s washable air filters featuring our exclusive Accumulator Chamber design are the most the most effective washable electrostatic air filters manufactured in the U.S.A. for residential use. This air filter design has been used successfully in residential furnaces for over 30 years, but the air filter design was originally designed for commercial applications over 50 years ago. Whether for standard furnace sizes, or custom built to meet a specific requirement, the DustPlus air filter is extremely effective electrostatic air filter for use in home.

LifeStyle® Plus Washable Electrostatic Air Filters

  • Permatron’s LifeStyle Plus washable electrostatic air filter series offers high efficiency air cleaning at an economical price.  Standard disposable filters trap only very large airborne particles.  Not only are these filters less efficient but they tend to clog, restricting air flow which results in increased heating and cooling costs.  LifeStyle Plus are filters are environmentally friendly with no disposable parts. The LifeStyle Plus air filters deliver the utmost in air filtration thanks to a unique combination of air filter media which is optimized to deliver peak performance. LifeStyle Plus is a great residential air filtration solution that is built to last a lifetime.
  • LifeStyle Plus Air Filters Available in 2 Models
  • LifeStyle Plus (Model LR) is designed to meet all current HVAC furnace manufacturer specifications delivering minimal  0.07″ w.g. initial resistance to air flow, while maintaining good arrestance efficiency.  Ideal for heat pumps, sensitive 90+ efficient furnaces and systems with limited air flow. This durable air filter is constructed with a combination of woven polypropylene media supported by a unique corrugated steel in a stainless steel frame.
  • LifeStyle Plus (Model MF) offers high efficiency allergy relief, delivering high arrestanceefficiency, while maintaining good initial resistance to air flow. This durable air filter is constructed with a combination of woven polypropylene, plus nonwoven polyester to increase its arrestance efficiency, supported by expanded metal and a stainless steel frame.
  • The LifeStyle Plus air filter series carries a lifetime warranty.

Adjustable Washable Electrostatic Air Filter

  • An adjustable air filter allows you to buy one air filter that will fit multiple sizes. Our adjustable furnace air filter (Model ADJ2025) is a permanent and washable electrostatic panel filter that can fit all sized furnace filters  from 14″ x 20″ to 20″ x 25″.
  • Installing An Adjustable Sized Air Filter
  • Installation is easy, with no screws needed. All you need to do is measure the length and width of the air filter you are replacing; trim the adjustable filtration media with scissors and insert the filtration media back into the “U” channeled durable plastic frame. Slide the panel frame sections together and the components are securely in place.
  • Washable Air Filters Are Environmentally Friendly
  • The adjustable air filter contains layers of woven polypropylene media and foam supported on each side by a durable plastic grid. The filter carries a lifetime warranty and an anti-bacterial agent is manufactured into the filter media to inhibit growth of bacteria on filter surface. Simply rinse with water monthly, let dry and reinstall in your HVAC system.

Contractors Choice Washable Air Filter

  • Contractors Choice filters the air with a very low initial air flow resistance (0.08″ w.g.). Constructed with a combination of woven electrostatic polypropylene and foam to achieve a high average arrestance efficiency, Contractors Choice air filter is environmentally friendly with no disposable parts. Standard disposable air filters trap only very large particles.  Not only are these filters less efficient but they tend to clog, restricting air flow which results in increased heating and cooling costs.
  • Contractors Choice Delivers Low Air Flow Resistance
  • Low air flow resistance is extremely important in the proper operation of today’s high efficiency heating and cooling systems. Low resistance to air flow also means better circulation,  even temperature control throughout the home and extended life of the system’s compressor and blower motor.
  • Contractors Choice Is Easy to Maintain
  • All that is required is to remove the filter, spray it with a common household cleaner, and rinse with water before you reinstall it.
  • The Contractors Choice air filter carries a lifetime warranty.

Permatron – Air Conditioner Filters

PreVent® Wrap-Around Coil Protecting Air Conditioner Filter

  • Permatron’s patented PreVent Equipment Protection Filter (Model PREVENTWA) is a washable synthetic fabric media, which traps airborne particulates before they enter the air conditioner condenser. The filter media needs no electrical connection or system modification.
  • Clean Coils + Good Air Flow = Cool Air
  • As the air conditioner runs, dirt, leaves, cottonwood and other debris get pulled into the outdoor condensing unit.  This clogs the cooling coil fins.  Clogged fins restrict air flow needed to operate the air conditioner.  As a result, the equipment loses it’s cooling capacity.  Electrical costs rise and equipment breaks down early.  The average cost of a new A/C system is $3,500-$4,000 in a 2,000 square foot home.  And the minimum cost to replace a burned out compressor is $1,000.  According to EPA research 0.042″ of dirt on an AC coil can reduce its efficiency by 21%.

PreVent Is Easy To Install and Maintain

This filter is available in a one size fits all, cut-to-fit style using black PVC coated polyester high abrasion media.  Simply wrap the filter around the outer perimeter of the air intake fins and secure in place with included elastic bungee cord hook attachments.  Trim off excess filter material with a scissors.  Built with durability in mind, PreVent will stand up to hostile environments including corrosive areas, UV exposure and fluctuating weather conditions.   Filter is easily removed and cleaned by spraying with a mild cleaner and rinsing with water or vacuumed in place by using a shopvac.  Filter is available in  38″ x 110″ and comes packaged with (3) 20″ bungee cords.

Air Conditioner Cut-to-Fit Air Filters for Wall or Window Units

Cool, clean air is what you can expect from your air conditioning unit with the addition ofPermatron’s easy to install, cut-to-fit air conditioning air filters.

Air Conditioner Filters – 4 Styles to Choose From

To install these air conditioning filters, simply measure the existing disposable air filter in the unit and trim our air filter pad to fit and replace the contaminated filter.  Keeping your air conditioning units running efficiently has never been easier! There are 4 types to choose from:

1. Washable PermaCool® Air Conditioner Filter
PermaCool (Model PCOOL1524) is a unique washable 1/4″ thick corrugated polypropylene filtration media whose electrostatic charge assists in removing dust, lint, pollen and other irritating pollutants from the air in your environment. This polypropylene media will not degrade over time as foam does and comes with a lifetime warranty.
PermaCool features a dense, 3-dimensional waffle weave configuration that enhances its filtration abilities and creates a rigid and durable electrostatic air filters for air conditioning units with the convenience of a cut-to-fit solution for easy installation. Unlike other media which may compress and restrict air flow, PermaCool retains its low resistance design after installation.
PermaCool air conditioner filters are available in individual sheets for single use in a standard wall or window air conditioning units or in service rolls for PTAC or multiple air conditioning unit usage. Every 30 days, this filter should simply be rinsed or vacuumed clean.
2.  Disposable Odor Control Filter with Activated Carbon
A second option is to use disposable odor and fume (Model CTF-ACF) removing activated carbon coated polyester filter media. This filter offers dual action media thatcaptures dirt and dust, plus adsorbs odors and fumes. Carbon won’t brush off. Change out filter as needed.
3.  Disposable Nonwoven Polyester Air Conditioner Filter
A third option is to use disposable nonwoven polyester (Model CTF-NWPE) that captures dirt and dust.  Change out filter as needed.
4.  Washable Foam Air Conditioner Filter
Our last option is to use a filter made of washable 20 PPI foam (Model CTF-FOAM) filter media. Every 30 days, this filter should be rinsed or vacuum cleaned.
All cut-to-fit air conditioner filters come in individual display pack cases or commercial bulk packs.
 

Permatron – Electronic Air Cleaner Filters

Electronic Air Cleaner Prefilter and Afterfilter

Create the ultimate air filtration performance in an electronic air cleaner with Permatron’ssuperior prefilter & afterfilter upgrade kit (Model EAC-KIT).

Air Cleaners Work Best With An Electrostatic Prefilter

Independent testing shows that using a higher efficiency, washable, electrostatic prefilterwill significantly enhance the working efficiency of the electronic air cleaner, without affecting the air flow requirements. In addition, the air cleaner is able to perform more effectively for longer periods before needing cleaning. Initial static pressure with Permatron prefilter 0.09 in w.g. Independent testing shows 40% increase in average Dust Spot Efficiency using a Permatron prefilter versus standard metal mesh prefilter. Our electrostatic prefilter (Model EAC-R) is also available separately from the activated carbon afterfilter.

Afterfilter Captures Odors and Ozone

An activated carbon afterfilter is recommended to adsorb any odors or fumes being recirculated through the home and to capture particles which did not take an electrical charge. The afterfilter also removes ozone emitted from electrical discharges and captures ash “brush-off” from the plates. The afterfilter will need to be changed as often as needed for ongoing odor problems. Electronic Air Cleaner Kits are made to fit any model electronic air cleaner, i.e., Honeywell, Goodman, Trion, Trion Air Bear, White Rogers, Carrier/Bryant, Trane or Lennox.

Air Cleaner Prefilter and Afterfilter Installation

Measure existing air filter for exact dimensions needed to fit your system. Replace the existing metal mesh prefilter with the electrostatic prefilter, and wash monthly.   The disposable activated carbon afterfilter is available in a 4-pack (Model-EAC-AC4). Depending on odor and fume levels, this panel should be changed every 3-4 months in the average household.

Metal Mesh Prefilter for Electronic Air Cleaner

This framed aluminum mesh prefilter (Model EAC-MM-SPEC) contains multiple layers of bonded aluminum to capture dust and grease.  This is also the type of air filter typically found in range hoods.

 

Permatron – Register Vent Filters

Register Vent Cut-to-Fit Air Filters

One of the best ways to keep dirt and debris from entering home HVAC systems is to installPermatron’s electrostatic air filter media in the intake vents and return vents of your home HVAC system. These electrostatic vent filters are so easy to install – you simply cut-to-fit the media with scissors, and install the filter  underneath any vent deflector.

Vent Air Filters – 3 Styles to Choose From

To install these vent filters, simply cut-to-fit the media with scissors, and install the filter underneath any vent deflector.  Keeping your intake and return vents clean of dust and dirt has never been easier! Each kit contains enough media for up to  12 standard register vents — (3) 12″ X 16″ sheets.  There are 3 types to choose from:

1.  Washable Polypropylene Vent Filter
Permanent polypropylene (Model VF-BHB) is a woven filtration media whose electrostatic charge assists in removing dust, lint, pollen and other irritating pollutants from the air in your environment. This polypropylene media will not degrade over time.  As needed, this filter should simply be rinsed clean.  Black or white media is available.
2.  Disposable Odor Control Vent Filter with Activated Carbon
A second option is to use disposable odor and fume (Model VF-ACF) removing activated carbon coated polyester filter media. This black filter offers dual action media that captures dirt and dust, plus adsorbs odors and fumes. Carbon won’t brush off. Change out filter as needed.
3.  Disposable Nonwoven Polyester Vent Air Filter
A third option is to use white high loft disposable nonwoven polyester (Model VF-NWPE) that captures dirt and dust.  Change out filter as needed.

Permatron – Appliance / Electronic Filters

Range Hood Air Filters

Permatron range hood filters collect odors, dust and grease in your ductless range hoods, chimney hoods or extractor hoods. Air filters can also be used in some microwave ovens and bath fans. UL Classified as to Flammability Only.  Permatron’s 1/8″ – 1/2″ thick aluminumModel RH series air filters come three styles:

1.  Model RH is a framed aluminum filter containing multiple layers of bonded aluminum in 1/8″-1/4″ thickness or multiple layers of bonded and corrugated aluminum in 1/2″ thickness that will capture dust and grease. Rinse clean with water and a mild spray cleaner.   This air filter carries a 5 year warranty.
2.  Model RHAC is a framed aluminum filter that contains coconut shell activated carbon impregnated nonwoven polyester media with fire retardant supported by light weightaluminum mesh captures dust, grease, plus odors and fumes. A dual action air filter, thenonwoven polyester captures dust and grease, while the activated carbon adsorbs odors and fumes.  Replace this disposable air filter as needed.
3.  Model CTF-RANGEHOOD is a 15″ X 19″ x 1/4″  cut-to-fit sheet of bonded aluminum mesh. Can be gently rinsed with water and a mild spray cleaner; replace as needed.

 

Appliance, Computers & Electronics Cut-to-Fit Air Filters

All electronically powered equipment has an air intake fan to keep the equipment motors running efficiently and at cooler temperatures. Proper air filters on computer CPUs, appliances and electronic air intakes will keep dirt and dust from invading sensitive home or office electronics, audio visual equipment, refrigerators, laboratory equipment or computer equipment.

Protect Against Invasion of Dust

Keeping appliances and electronic intakes clean can be particularly difficult in areas where equipment sits on or close to the floor where high amounts of dirt accumulate – especially in high foot-traffic areas. One of the best ways to prevent dust and dirt from entering appliances and electronic equipment where it can impede the unit’s performance is through the installation of appliance and electronic protection air filters on air intake vents.

Appliance, Computer and Electronics Air Filter Models

Permatron’s cut-to-fit air filters for appliances and electronic equipment are easy to install – you simply cut-to-fit the media with scissors, and install the air filter on top of any vent cover or fan guard using the  hook/loop attachment. Nonwoven polyester is an air filter media that features high loft to capture dirt and dust, with a low density to maximize air permeability and prevent airflow restriction.

Model CTF-ELEC10 & Model CTF-ELEC30 is a cut-to-fit kit containing 4 (12″ X 12″) sheets of white nonwoven polyester filter media and 4 (12″) strips of adhesive backed hook & loop mounting tape. This air filter is available in a 10 pack case of individual display packs or 30 pack commercial bulk case.
Model PREVENT10, Model PREVENT50 & Model PREVENT100 is a computer protection filter kit containing 6 (4-1/4″ X 4-1/2″) sheets of nonwoven polyester filter media and 4 (4″) strips of adhesive backed hook & loop mounting tape. This air filter is available in a 10 pack case of individual display packs, a 50 piece bulk case with 200 pieces of hook & loop or a 100 piece media replacement case.
 

Permatron – Air Intake Protection

HailStop® Hail Guard Netting

Protect rooftop HVAC equipment from increasingly frequent hailstorms. Weather and climate-related insurance losses have more than doubled every decade since the 1980s. Reports of 2-inch hail have increased by a factor of 5 since the 1950’s and doubled since the early 2000’s, with similar increases reported for hailstorms overall. Even small hail can damage rooftop HVAC equipment by bending and denting fins, which in turn blocks air flow and reduces operating efficiency. And larger hail can cause much more severe and costly damage.

Hail Guard Netting Protects Valuable Equipment

Permatron HailStop Hail Guard PVC netting protects your investment in HVAC equipment. Designed to deflect airborne objects and protect delicate fins, Permatron’s HailStop is easy to mount across the any type of equipment air intake fins. In addition, it can be layered behindPreVent Equipment Protection filters for protection of airborne debris from dust particles to large hailstones. Some of the added benefits of our hail guard netting include:

UV Protected
Rot Resistant
Weather Resistant
Abrasion and Corrosion Resistant
 
HailStop Is Easy To Install

HailStop hail guard netting is made of a rigid black polypropylene with diamond shaped openings. The netting is lightweight and extremely easy to install. HailStop can easily be cut to fit using scissors or utility knife. HailStop hail guard netting can be easily installed usingPermatron’s plastic mounting kit. The plastic holding clips have a moveable/locking tab that opens & closes for secure installation & easy removal and cleaning. The plastic mount clips come in 2 height sizes so that outdoor air intakes and equipment can be protected using bothHailStop and PreVent filter screens.

Model# MOUNTKIT-SINGLE – HailStop Alone
Model# MOUNTKIT-DOUBLE – HailStop & PreVent Model U or Model BHA Filter Screen

 

HailStop Product Comes In 3 Models

1.  Model HailStop50 is sold in master rolls 54″ wide x 50 foot length.
2.  Model HailStop10 is an easier to handle service pack for jobs up to 10 Tons, and includes a package of 12 single height mount clips with screws.
3.  Model HailStop20 is an easier to handle service pack for jobs up to 20 Tons, and includes two packages containing 24 single height mount clips with screws and 12 zip ties to secure netting panels side by side.
 

Simply powerful PreVent® system filter screens

PreVent screens Model U and Model BHA are flexible, vinyl-edged equipment protection air filters that capture airborne particulates before they can enter your HVAC system. Custom-designed to fit the exact perimeter of any outdoor air intake, PreVent is UV protected and has a variety of design features which allow filters to be attached easily and securely.

Other PreVent filter options include the PreVent® 3-Dimensional Bonnet and Vent Cap with flexible vinyl or elastic edging, PreVent® Model R with a rigid steel frame, and HailStop® Hail Guard Netting.

  • Model U1 and Model U2 are constructed with one or two layers of three-dimensional black honeycomb polypropylene electrostatic media, encased in a sewn vinyl edge with single or double stitching and attached with stainless steel grommets. We can also replace the vinyl frame with a sonic welded edge for the Model U1 or Model U2 filter with polypropylene media. The media can be sonic welded in single, double or triple layers with a clean finished edge in place of the vinyl binding.
  • Model BHA is constructed with one layer of black PVC-coated polyester high-abrasion media, encased in a sewn vinyl edge with single or double stitching and attached via stainless steel grommets. This media meets NFPA-701 Flame Resistance.
  • Independent testing by UL Laboratories showed PreVent Filters cause less than 1% change in system discharge pressure.  The filter has a low .02-.05 in. w.g. initial resistance to air flow, depending on the filter media and number of layers required.
  • Both types of  black filter media are heat stabilized, and will not shed fibers, absorb moisture or promote bacterial growth.
  • The inherent electrostatic charge of our woven polypropylene (BHC) media delivers a higher particle arrestance efficiency and enhanced ability to capture and hold smaller particles. Our heavy-duty high abrasion (BHA) media offers strength, durability and allows us to manufacturer Model BHA in oversized dimensions to fit extra-large equipment such as cooling towers.
  • Designed for strength and durability, PreVent filters stand up to extreme outdoor or indoor exposure, corrosive chemicals, high-velocity air flow and industrial cleaning and maintenance.
  • Customized to meet any equipment air intake or ventilation inlet and outlet challenge—including those requiring pipe and electrical cut-outs, special shapes and skirting where grommet attachment to the metal enclosure is not possible. Hook/loop or magnets can be added to completely seal air bypass.
  • Mounting options for grommets include anchored mount jack nut kits, quick-mount self-tapping slotted screws or a plastic mounting clip with easy open/close access. Hook/loop can also be easily attached, with the loop side sewn onto the vinyl edge of the filter and the hook side with adhesive backing attached to the equipment’s housing.
  • Oversized flexible vinyl framed filters can be made in one or multiple sections for large equipment.  A vinyl center seam is required for dimensions over 60″. Plastic snap mounts are available to overlap multiple filter screens for extra-large air intake applications.
  • Standard five-year warranty; extended warranty available upon request.

PreVent® Model R Air Intake Filter

PreVent Model R1 or Model R2 is an air intake equipment protection filter that draws in and traps airborne particulates before they can enter the system. Constructed with 1 or 2 layers of three-dimensional black honeycomb polypropylene electrostatic media, PreVent Model R air intake filter is encased in a 1/8″-3/8″ rigid galvanized steel frame in various thicknesses.  This air filter can slide into an air filter holding channel, be finished with our patented magnetic mount strips used for flat surface indoor equipment applications,  clips or a Z bracket to keep multiple intake filters side-by-side.

  • Washable UV protected media, stands up to extreme  outdoor or indoor exposure, corrosive chemicals, high velocity air flow, as well as industrial cleaning and maintenance.
  • Independent testing, conducted by UL Laboratories, showed PreVent Filters cause less than 1% change in system discharge pressure.  The filter has a low .02-.05 in. w.g. initial resistance to air flow depending on the filter media and number of layers required.
  • BHC polypropylene media is heat stabilized, and will not shed fibers, absorb moisture or promote bacterial growth.
  • Inherent electrostatic charge delivers a higher particle arrestance efficiency and enhanced ability to capture and hold smaller particles. 
  • Custom made to the exact perimeter of the air inlet or outlet.
  • Steel frame options include stainless steel, aluminum or painted black galvanized. Magnetic attachment not available on aluminum frame.  Stainless steel is recommended for larger applications.
  • Standard Model R 5 year warranty; extended warranty available upon request.
  • Magnetic Attachment 2 year warranty.

WeatherProtect™ Vinyl Weather Curtain

Used during the winter months to help prevent compressor stalling by blocking cold air from reaching the coils. Installing a solid vinyl intake cover across the outside face of the enclosure will also prevent snow and ice build-up and damage to the compressor. When freezing temperatures create system problems, HVAC technicians can react quickly by affixing the solid vinyl curtains before wind conditions generate ice and cause coil pipes to burst. The curtains are used as an alternative to adding glycol anti-freeze to the system, which has been found to reduce cooling efficiency by 30%.
The winter weather curtains are made from solid vinyl sheeting that is custom sized and finished with vinyl edging and stainless steel grommets. These winter weather curtains can be easily attached over our PreVent air intake filters during the winter months.
 

Permatron – Washable Air Filters

Washable Electrostatic Commercial Air Filters | Model IN | Model HFA

From the paper mills on the West coast to textile mills on the East coast to the hospitals and airports in the Midwest, Permatron’s commercial air filters are the original industrial workhorses of permanent, washable electrostatic air filtration. Model IN and Model HFA filters are the best and the oldest washable electrostatic air filters available today. Permatron commercial air filters come in a wide range of sizes – or can be quickly custom built to suit any requirement.

Electrostatic Air Filters for Commercial Systems

Our washable electrostatic air filters for commercial industrial applications includes two models to choose from, depending on your air filtration needs:

  • Model HFA  is our high efficiency commercial filter, containing a combination of white electrostatic polypropylene and white nonwoven polyester for increased arrestanceefficiency, wire reinforced in a galvanized steel frame.  Model HFA is ideal for facilities that require a high particle arrestance efficiency.
  • Model IN is our durable, high velocity air flow commercial air filter, containing multiple layers of white woven electrostatic polypropylene fabric with a high waffle construction and wire reinforced in a galvanized steel frame. Model IN is ideal for facilities that require low air flow resistance, high velocity air flow is pushed through limited filter surface areas or high dirt load filtration with easy cleanability. Commercial grade Model IN electrostatic air filter will outperform and outlast a metal mesh panel filter in many applications. Model IN with a stainless steel frame works well in wet, marine environments where mold and bacteria can be a concern.
  • The Model HFA and Model IN air filters carry a 5 year warranty. The benefits ofcleanability and long-term durability in high air velocity systems or caustic environments means Permatron commercial air filters offer the cost effective, energy efficient and environmentally friendly solutions to your panel air filtration needs.  Both models are available with a stainless steel frame, upon request. Customized wire reinforcement is available for clean-in-place maintenance programs. These air filters air filters may be sprayed with a detergent and water rinsed or vacuumed for dirt removal. Permatron commercial filters feature FDA approved components for use in food service and food processing applications.

What Makes Permatron Commercial Electrostatic Air Filters the Best?

Utilizing Permatron’s exclusive Accumulator Chamber design, these filters consist of two electrostatically charged fabric panels separated by our unique Accumulator Chamber to produce a very effective three-stage filtration process. This design has been in use since 1957 and proven highly effective in commercial and industrial HVAC applications.

 

Washable Foam Air Filter

Foam Filter

Permatron manufactures air filters with a wide range of air filter media. One of the more versatile filter media we offer is foam. This media is both resilient and flexible and offers effective filtration properties for a wide range of air filter applications.

Permatron’s foam air filters contain 20 PPI polyester polyurethane foam supported by expanded metal mesh on both sides.

Foam Air Filter Available in 2 Models

Two foam air filter models are available from Permatron:

  • Model FFA is a washable foam media air filter with a 1″ thick aluminum frame and expanded aluminum mesh support grids.
  • Model FFG is a washable foam media air filter with either a 1/2″ or 1″ thick galvanized steel frame and expanded metal mesh support grids.
  • Our foam filters are available in standard and custom sizes backed by a 5 year warranty.

PermaFlo®  Rigid Polyester | Gray | Blue

PermaFlo polyester air filtration media is an excellent choice for a mist eliminator. This rigid polyester media is self-supporting and frames are optional. Cleans easily with water. Safe to handle, no fiberglass, sharp edges, flaking or shedding. Humidity resistant, PermaFlo will not absorb moisture or sag in moist environments. UL Classified as to Flammability Only; FMVSS302 certification. Can be easily cut-to-fit with scissors. Available in rolls or custom cut pads.

This type of washable air filter media is easily cleaned with water for long term use.  It’s bi-directional (unlike hogs hair that must be installed correctly or face loading rapidly occurs) air flow insures that it can’t be installed wrong.  PermaFlo offers a lower initial resistance to airflow than pleated filters – 0.3″ w.g. in 1/2″ thickness and 0.09″ in 1″ thickness.

Independent test results for water penetration using UL-50 rain yielded “no water droplets penetrating to the inside of the testing chamber. No moisture on the back side surface of the expanded galvanized protective screen.”

  • PermaFlo® Gray Rigid Polyester is a better mist eliminator. Antimicrobial has been added to this filter media to inhibit the growth of bacteria, fungi, mold spores, mildew and other contaminants that can be created in environments with constant humidity and moisture.
  • PermaFlo® Blue Rigid Polyester is a fantastic alternative to Hogs Hair media and a high performance, economical alternative to disposable air filters.
  • PermaFlo Is Available In Pads or Service Rolls
  • PermaFlo media can be cut with scissors to the exact custom size each application requires, eliminating air by-pass.  Convenient pads or service rolls are available in:
  • 25″ x 48′
  • 25″ x 36′
  • 30″ x 36′
  • 15″ X 24″ X 1/2″  Bulk Packed Pads
  • 20″ X 25″ X 1″ Bulk Packed Pads
  • 20″ X 25″ X 1″ Display Packs

Steel pad stabilizing frames for use in filtration applications involving media pad change outs are also available for cut pads. Stabilizing frames are available with criss crossed wire supports to hold media pad into frame.

Nonwoven Media Mount Adapter

This washer kit is an add-on piece to install rigid air filter pads of nonwoven polyester media firmly in place on HVAC air intakes. The black nylon washer is UV protected and fits over single or double height Permatron mount clips. Available in 12 packs. Simply start by adding a hole through the polyester media pad by using a screwdriver or another pointed tool, push the media down onto the open mount, and place the washer on top. Close tab downward, locking in position. The filter media is secured in place, even against high winds.

  • PermaFlo Rigid Filter Gray Media Spec Sheet
  • PermaFlo Rigid Filter Blue Media Spec Sheet
  • Commercial Industrial Air Filters Brochure
  • Non-woven Media Mount Adapter
     

    Permatron – Disposable Air Filters

    Pleated Air Filters

    Extended surface disposable pleated air filters feature high performance 100% synthetic media bonded to a metal grid on the air exiting side.   Deep configuration pleats allow maximum air flow and dust holding capacity. The filter media is enclosed in a durable moisture-resistant die cut frame with a diagonal and horizontal stabilizer face grid and metal grid support. UL 900 Classified as to Flammability Only.  Disposable pleated air filters are sold by the full case.

    Disposable Pleated Air Filters Available in 2 Models

    • MERV  8 —  Model PL30 is available in 1″ , 2″ and 4″ thickness
    • MERV 11 —  Model PL30PLUS is available in 1″, 2″ and 4″ thickness
    • Custom Pleated Air Filters Available
    • Disposable Pleated Filter Spec Sheet
  • Disposable Fan Shroud Air Filter

    Processing plant workers, as well as items manufactured with heat require air cooling.  Typically this cooling comes from recirculating fans that blow onto the product before it can be packaged or workers manning the assembly line.  Unfortunately the mobile and pedestal style air circulator fan components can also become covered in airborne contaminates as the equipment air intake draws in facility air, picks up the environmental particles which then spread throughout the motor, blades and fan guards, and can potentially be blown back out into the facility and onto finished product.

    Fan Shroud Captures Cooling Fan Dust

    Custom sized to fit securely on the backside of a fan guard, the fan shroud filter covers the backside of the fan cage, and wraps around the motor encasement.  Filter bonnet is held securely in place with an elastic edge attachment and hook/loop closure.

    Available in disposable nonwoven polyester, the fan shroud attracts and holds the particles before they can enter the equipment, eliminating particle build-up and blow-off.   Easily removed, the disposable polyester fan shrouds can be changed out and disposed of depending on the facility needs.  Worker indoor air quality, the cooling equipment and the freshly made products stay clean.

    AIB Safety Audit & Inspection guidelines used in food processing plants include Dust Collection & Filtering Devices be put in place to prevent possible contamination to food products from threads, lint and fibers.  PreVent® Equipment Protection bonnet filters or fan shrouds would enable a facility to pass the AIB audit.

    Bonnet fan guards, fan shrouds, vent caps, ceiling diffuser and inlet/outlet sock style filters are also available in washable electrostatic polypropylene.

    Disposable Bonnets

    Available in disposable nonwoven polyester, fits over the circular front side of a fan guard grill to stop dust and dirt from blowing out into the environment.  Measure UP and OVER the front half of the grill.

    MERV 8 & MERV 11 disposable bonnets available upon request

  • Disposable Fan Shroud Spec Sheet
  • Washable Fan Guard Spec Sheet
  • Washable 3D Filter Literature
  • Washable Vent Diffuser Spec Sheet
     

    Activated Carbon Panel Air Filter Removes Odors

    Activated carbon is an effective method of removing and preventing odor/fume buildup in recirculated air. Utilizing the finest quality coatings, 3.2 ounce nonwoven polyester is impregnated 150% with finely ground activated carbon coating and heat set to retain those coating when the media is rinsed or vacuumed free of dust.

    Just as a sponge soaks up water, activated carbon adsorbs organic-based odors. When the filter media becomes saturated, the air filter is disposed of and replaced with a new activated carbon air filter panel. A flat panel-type air filter framed in galvanized steel, these models contain approximately 14 grams of activated carbon per square foot of media area, contained in a 1/8″ to 1/4″ galvanized steel frame.

    Dual Action for Particulate & Odor/Fume Removal

    • Model CHARWR contains an added layer of wire for support.
    • Model CH150 does not contain wire support as it is unnecessary in applications that already contain permanent wire support.
    • Activated Carbon Panel Spec Sheet

    Air filters over 600 square inches must have wire support. Standard and custom sizes are sold in 4-pack units. 1/4″ frame can be converted to a 1″ thickness, with the addition of Permatron’s “C” frame.

    Permatron – Marine Environment Filters

    Corrosive Marine Environment Air Filter |DuraLo™ | DuraFoam™ | DuraLoft®

    Wet and corrosive environments present a whole host of unique problems for air filtration. Airborne dust particles, bacteria, molds, yeast and VOC’s can build up to be a serious problem. Permatron designed and manufactures industrial air filters for use in a wide range of applications including corrosive and wet environments. Our industrial air filters work as a first line of defense to protect extremely valuable equipment – even in extreme environments.

    Wet Environment Air Filters Available in 3 Models

    1.  DuraLo (Model DLO) is a washable polypropylene media air filter that works extremely well in wet environments, because the woven media of polypropylene is manufactured as a mono (single strand) filament.  It does not have a porous surface, meaning it will not absorb or retain moisture, and does not encourage the growth of mold, bacteria, viruses, yeast or fungi.  These are all common air filtration complaints in the boating/shipping industry.  Containing our exclusive Accumulator Chamber® construction, this filter is designed to work in applications requiring very low resistance to air flow or high velocity air flow.  Available in 1″ or 2″ thickness, the filter media is encased in a front and rear black plastic grid for added support, framed in stainless steel.
    2.  DuraFoam (Model DF) contains a combination of polypropylene and 20 PPI synthetic foam media that can be used in marine environments requiring a greater particlearrestance efficiency. The urethane foam’s ethers hold up very well in wet environments including salt water, and have historically been used for pond and water filters. Available in 1/2″  thickness, the filter media is encased in a front and rear black plastic grid for added support, framed in stainless steel.  Available in 1″  thickness, the filter media is encased in a front and rear black plastic grid for added support, framed in either stainless steel or black plastic.
    3.  DuraLoft (Model DL) contains Permatron’s rigid high loft PermaFlo polyester media for marine air filter applications needing greater moisture condensation surface area. The rigid high loft blue polyester fiber does not flake, shed or have sharp edges. The polyester fibers are unaffected by moisture, and clean easily with water for long term use. Available in 1″  thickness, the filter media is encased in a front and rear black plastic grid for added support, framed in stainless steel or black plastic.  Available in 2″  thickness, the filter media is encased in a front and rear black plastic grid for added support, framed in stainless steel.

    DuraFoamDuraLo and DuraLoft marine environment air filters carry a 5 year warranty.

  • Marine Air Filter Spec Sheet
  • Model IN Spec Sheet
     
  • Washable Electrostatic Commercial Air Filters | Model IN | Model HFA

    From the paper mills on the West coast to textile mills on the East coast to the hospitals and airports in the Midwest, Permatron’s commercial air filters are the original industrial workhorses of permanent, washable electrostatic air filtration. Model IN and Model HFA filters are the best and the oldest washable electrostatic air filters available today. Permatron commercial air filters come in a wide range of sizes – or can be quickly custom built to suit any requirement.

    Electrostatic Air Filters for Commercial Systems

    Our washable electrostatic air filters for commercial industrial applications includes two models to choose from, depending on your air filtration needs:

    Model HFA  is our high efficiency commercial filter, containing a combination of white electrostatic polypropylene and white nonwoven polyester for increased arrestanceefficiency, wire reinforced in a galvanized steel frame.  Model HFA is ideal for facilities that require a high particle arrestance efficiency.
    Model IN is our durable, high velocity air flow commercial air filter, containing multiple layers of white woven electrostatic polypropylene fabric with a high waffle construction and wire reinforced in a galvanized steel frame. Model IN is ideal for facilities that require low air flow resistance, high velocity air flow is pushed through limited filter surface areas or high dirt load filtration with easy cleanability. Commercial grade Model IN electrostatic air filter will outperform and outlast a metal mesh panel filter in many applications. Model IN with a stainless steel frame works well in wet, marine environments where mold and bacteria can be a concern.
    • The Model HFA and Model IN air filters carry a 5 year warranty. The benefits ofcleanability and long-term durability in high air velocity systems or caustic environments means Permatron commercial air filters offer the cost effective, energy efficient and environmentally friendly solutions to your panel air filtration needs.  Both models are available with a stainless steel frame, upon request. Customized wire reinforcement is available for clean-in-place maintenance programs. These air filters air filters may be sprayed with a detergent and water rinsed or vacuumed for dirt removal. Permatron commercial filters feature FDA approved components for use in food service and food processing applications.

    What Makes Permatron Commercial Electrostatic Air Filters the Best?

    Utilizing Permatron’s exclusive Accumulator Chamber design, these filters consist of two electrostatically charged fabric panels separated by our unique Accumulator Chamber to produce a very effective three-stage filtration process. This design has been in use since 1957 and proven highly effective in commercial and industrial HVAC applications.

    Washable Electrostatic Commercial Air Filters | Model IN | Model HFA

    From the paper mills on the West coast to textile mills on the East coast to the hospitals and airports in the Midwest, Permatron’s commercial air filters are the original industrial workhorses of permanent, washable electrostatic air filtration. Model IN and Model HFA filters are the best and the oldest washable electrostatic air filters available today. Permatron commercial air filters come in a wide range of sizes – or can be quickly custom built to suit any requirement.

    Electrostatic Air Filters for Commercial Systems

    Our washable electrostatic air filters for commercial industrial applications includes two models to choose from, depending on your air filtration needs:

    Model HFA  is our high efficiency commercial filter, containing a combination of white electrostatic polypropylene and white nonwoven polyester for increased arrestanceefficiency, wire reinforced in a galvanized steel frame.  Model HFA is ideal for facilities that require a high particle arrestance efficiency.

    Model IN is our durable, high velocity air flow commercial air filter, containing multiple layers of white woven electrostatic polypropylene fabric with a high waffle construction and wire reinforced in a galvanized steel frame. Model IN is ideal for facilities that require low air flow resistance, high velocity air flow is pushed through limited filter surface areas or high dirt load filtration with easy cleanability. Commercial grade Model IN electrostatic air filter will outperform and outlast a metal mesh panel filter in many applications. Model IN with a stainless steel frame works well in wet, marine environments where mold and bacteria can be a concern.

    The Model HFA and Model IN air filters carry a 5 year warranty. The benefits ofcleanability and long-term durability in high air velocity systems or caustic environments means Permatron commercial air filters offer the cost effective, energy efficient and environmentally friendly solutions to your panel air filtration needs.  Both models are available with a stainless steel frame, upon request. Customized wire reinforcement is available for clean-in-place maintenance programs. These air filters air filters may be sprayed with a detergent and water rinsed or vacuumed for dirt removal. Permatron commercial filters feature FDA approved components for use in food service and food processing applications.

    What Makes Permatron Commercial Electrostatic Air Filters the Best?

    Utilizing Permatron’s exclusive Accumulator Chamber design, these filters consist of two electrostatically charged fabric panels separated by our unique Accumulator Chamber to produce a very effective three-stage filtration process. This design has been in use since 1957 and proven highly effective in commercial and industrial HVAC applications.

    Permatron – Metal Air Filters

    Aluminum, Galvanized & Stainless Metal Mesh Filters

    Permatron metal mesh filters are available in depths of either 1″ or 2″. Our air filters contain multiple layers of  aluminum, galvanized steel or stainless steel metal mesh, expanded through specified feeds to ensure maximum internal loading capabilities and superior filtration.

    Metal Mesh Air Filter Models

    Permatron manufactures a wide range of metal mesh air filters. We use a wide range of materials to ensure effective filtration in a wide range of applications. We also design and manufacture custom variations on the metal mesh filters listed below. If you’d like to discuss our custom design and manufacturing capabilities, please contact Permatron today.

    1.  Model MMA – Aluminum Mesh Filter contains 5 layers of corrugated aluminum mesh, with wire reinforcement encased within an aluminum rolled frame.  Model MMA operates to a maximum temperature of 240 degrees. Available in  1/2″, 1″, 2″ thickness.
    2.  Model MMH – Heavy Duty Aluminum Filter contains multiple layers of heavy duty aluminum metal mesh encased in an aluminum frame.  Model MMH operates to a maximum temperature of 275 degrees. Available in 1″ and 2″ thickness.
    3.  Model MMS – Stainless Steel Filter contains multiple layers of stainless steel mesh with wire reinforcement encased within a stainless steel rolled frame.  Model MMS operates to a maximum temperature of 900 degrees.  Available in 1″ or 2″ thickness.
    4.  Model MMG – Galvanized Steel Filter contains multiple layers of galvanized steel metal mesh, with wire reinforcement encased in a galvanized steel frame.  Model MMG operates to a maximum temperature of 425 degrees.  Available in 1″ and 2″ thickness.

    Permatron metal mesh air filters are UL Classified As to Flammability Only, and carry a 5 year warranty.

    Grease Baffle Filters: Stainless Steel Baffle Filters

    Grease filters are designed to remove grease particles from exhaust air streams.The most common grease filters currently in use are the baffle-type. Permatron’s metal grease baffle filters are available in three models. Our metal grease filters are made of galvanized steel, aluminum or stainless steel.

    How Do Metal Grease Filters Work?

    Our baffle grease filters are 2″ thick and contain two layers of roll formed baffles which are equally spaced. The spacing built into the filter creates an optimized air flow which helps collect the grease inside the filter. Grease then drains down the baffles and into collecting a trough. Permatron metal grease filters are designed to prevent flames from passing through the filter baffles. They are constructed from different materials to withstand different temperature levels. Read additional information on Grease Filters as published in the 2014 NAFA Guide

    Constructed from different materials to withstand different temperature levels, Permatron metal  baffle filters are available in:

    1.  Model GFG constructed of galvanized steel for a maximum temperature 450 degrees F; Classified by UL (grease) NFPA std. 96.
    2.  Model GFA constructed of aluminum for a maximum temperature 250 degrees F.
    3.  Model GFS constructed of 304 stainless steel for a maximum temperature of 900 degrees F; also available in 430 stainless steel.

    Washable Electrostatic Commercial Air Filters | Model IN | Model HFA

    From the paper mills on the West coast to textile mills on the East coast to the hospitals and airports in the Midwest, Permatron’s commercial air filters are the original industrial workhorses of permanent, washable electrostatic air filtration. Model IN and Model HFA filters are the best and the oldest washable electrostatic air filters available today. Permatron commercial air filters come in a wide range of sizes – or can be quickly custom built to suit any requirement.

    Electrostatic Air Filters for Commercial Systems

    Our washable electrostatic air filters for commercial industrial applications includes two models to choose from, depending on your air filtration needs:

    • Model HFA  is our high efficiency commercial filter, containing a combination of white electrostatic polypropylene and white nonwoven polyester for increased arrestanceefficiency, wire reinforced in a galvanized steel frame.  Model HFA is ideal for facilities that require a high particle arrestance efficiency.
    • Model IN is our durable, high velocity air flow commercial air filter, containing multiple layers of white woven electrostatic polypropylene fabric with a high waffle construction and wire reinforced in a galvanized steel frame. Model IN is ideal for facilities that require low air flow resistance, high velocity air flow is pushed through limited filter surface areas or high dirt load filtration with easy cleanability. Commercial grade Model IN electrostatic air filter will outperform and outlast a metal mesh panel filter in many applications. Model IN with a stainless steel frame works well in wet, marine environments where mold and bacteria can be a concern.

    The Model HFA and Model IN air filters carry a 5 year warranty. The benefits ofcleanability and long-term durability in high air velocity systems or caustic environments means Permatron commercial air filters offer the cost effective, energy efficient and environmentally friendly solutions to your panel air filtration needs.  Both models are available with a stainless steel frame, upon request. Customized wire reinforcement is available for clean-in-place maintenance programs. These air filters air filters may be sprayed with a detergent and water rinsed or vacuumed for dirt removal. Permatron commercial filters feature FDA approved components for use in food service and food processing applications.

    What Makes Permatron Commercial Electrostatic Air Filters the Best?

    Utilizing Permatron’s exclusive Accumulator Chamber design, these filters consist of two electrostatically charged fabric panels separated by our unique Accumulator Chamber to produce a very effective three-stage filtration process. This design has been in use since 1957 and proven highly effective in commercial and industrial HVAC applications.

    Range Hood Air Filters

    Permatron range hood filters collect odors, dust and grease in your ductless range hoods, chimney hoods or extractor hoods. Air filters can also be used in some microwave ovens andbath fans. UL Classified as to Flammability Only.  Permatron’s 1/8″ – 1/2″ thick aluminumModel RH series air filters come three styles:

    1.  Model RH is a framed aluminum filter containing multiple layers of bonded aluminum in 1/8″-1/4″ thickness or multiple layers of bonded and corrugated aluminum in 1/2″ thickness that will capture dust and grease. Rinse clean with water and a mild spray cleaner.   This air filter carries a 5 year warranty.
    2.  Model RHAC is a framed aluminum filter that contains coconut shell activated carbon impregnated nonwoven polyester media with fire retardant supported by light weightaluminum mesh captures dust, grease, plus odors and fumes. A dual action air filter, the nonwoven polyester captures dust and grease, while the activated carbon adsorbs odors and fumes.  Replace this disposable air filter as needed.
    3.  Model CTF-RANGEHOOD is a 15″ X 19″ x 1/4″  cut-to-fit sheet of bonded aluminum mesh. Can be gently rinsed with water and a mile spray cleaner; replace as needed.

    Permatron – Odor / Fume Removal Filters

    DustPlus® 2 Odor and Particulate Removal Air Filter

    The DustPlus air filter, Model DP2, is uniquely designed to electrostatically remove airborne particulate matter, plus adsorb odors and fumes. The DustPlus air filter is enclosed in a 2″ thick galvanized steel frame that opens and closes for back panel replacement. This air filter contains a permanent washable electrostatic front panel.
    Acting as a prefilter, this air filter panel uses a combination of impingement and electrostatic charge to attract and hold airborne particles like dust. The permanently affixed rear wire panel creates a holding chamber for a high density odor and fume removal filter like activated carbon or carbon with alumina for light gases.
    Electrostatic Filter Applications
    Rugged framing provides stability when utilizing either disposable 1″ filters or media pads. Built to withstand rigorous industrial conditions, including heavy dirt loads and vibration from high velocity air flow, DustPlus can be used as a prefilter to extend the service life of any type of costly replacement filter or to stabilize a less durable disposable air filters. The front electrostatic filter captures larger particles, allowing the odor removing media to work without interference by face loading of large airborne particles.
    Replaceable fill options include a high density 60% minimum activity granular carbon only pack or carbon and alumina with potassium permanganate for light gases. Both options are encased in flexible nylon mesh scrim.
    DustPlus electrostatic filters should be periodically rinsed or vacuumed free of accumulated particles. Water and a mild detergent may be used on the permanently attached front polypropylene panel; the activated carbon media/disposable filter inside theDustPlus should be removed from the frame and replaced.
    Depending on the environment, odor removing media like activated carbon can last up to six months. Once the media reaches maximum adsorption, it is simply removed andreplaced. The HVAC system’s recirculating fan should be kept running to ensure maximum air contact with air filters and adsorption media.
    Permatron air filter frames also available in stainless steel.

    Activated Carbon Panel Air Filter Removes Odors

    Activated carbon is an effective method of removing and preventing odor/fume buildup in recirculated air. Utilizing the finest quality coatings, 3.2 ounce nonwoven polyester is impregnated 150% with finely ground activated carbon coating and heat set to retain those coating when the media is rinsed or vacuumed free of dust.

    Just as a sponge soaks up water, activated carbon adsorbs organic-based odors. When the filter media becomes saturated, the air filter is disposed of and replaced with a new activated carbon air filter panel. A flat panel-type air filter framed in galvanized steel, these models contain approximately 14 grams of activated carbon per square foot of media area, contained in a 1/8″ to 1/4″ galvanized steel frame.

    Dual Action for Particulate & Odor/Fume Removal

    • Model CHARWR contains an added layer of wire for support.
    • Model CH150 does not contain wire support as it is unnecessary in applications that already contain permanent wire support.

    Air filters over 600 square inches must have wire support. Standard and custom sizes are sold in 4-pack units. 1/4″ frame can be converted to a 1″ thickness, with the addition of Permatron’s “C” frame.

    Pleated Activated Carbon Filters for Odor, Fume, Gas Removal

    Activated carbon is an effective way to remove and prevent odors / fume buildup in recirculated air. Permatron offers two types of disposable, extended surface carbon pleated air filters. with60% activity granular activated carbon.  This 1″ pleated type filter  has approximately 3X the effective carbon media surface of our ¼” panel filter.

    Activated carbon with alumina and 5% potassium permanganate should be used  for light gas removal, including ammonia, formaldehyde, hydrogen sulfide and sulfur dioxide.

    Extended Surface Carbon Pleats

    Permatron’s custom air filters feature high performance 100% synthetic air filtration media that is pleated and impregnated with activated carbon to allow total media usage, maximum air flow and high dust holding capacity.

    The air filter media is bonded to expanded metal support grids to prevent sagging, air bypass and media flutter. These custom filters are encased in moisture resistant carrier board frame with diagonal & horizontal support members.

    • Model CHARPL is available in 1″, 2″ and 4″ thickness.
    • Model CHARBXPL is available in 1″, 2″ and 4″ thickness.

    High Density Carbon Pack Air Filters For Odor/Fume/Gas Removal

    Activated carbon has been proven to remove and prevent odors and fumes from building up in recirculated air. Permatron offers two types of disposable, high density granular carbon pack air filters.

    CWC Carbon Filter Packs

    Granular carbon is contained in flexible nylon mesh that will not settle. Our CWC carbon pack offers gas phase, 60% minimum activity granular activated carbon with nearly 5 million square foot of surface area per pound for odor/fume removal.

    CWB Carbon Filter Packs

    CWB carbon packs contain two types of sorptive media, equal amounts of impregnated activated alumina with potassium permanganate and activated carbon bonded within a media for a uniform bed for light gas removal including ammonia, formaldehyde, hydrogen sulfide and sulfur dioxide.

    Commercial Air Filters for Odor Removal

    Both Model CWCPO300 and Model CWBPO375 are available with different densities of carbon, depending on the odor removal application. These air filters are sold in an unframed pad form, a framed pad option, or a framed prefilter, pad and afterfilter all together.

    The 3 stage filtration styles are available with a ¾” polyester prefilter for particulates and polyurethane foam afterfilter to capture remaining particulates and prevent carbon from entering the system.

    Moisture resistant beverage board die cut frame with stabilizer face grids and wire reinforcement are also available.

    Bulk Activated Carbon Filled Trays

    Adsorbent 100% filled V-bank trays (packed beds), providing even bed thickness and reduced bypass, can be used for both front and side access housings in heavy duty air cleaners, fume hoods and special odor control applications.

    Bulk carbon is available in 25 lb coconut shell or coal pellet activated carbon for general odor removal including VOC’s and ozone. Bulk 40 lb zeolite  or zeolite with potassium (5-%) is available for light gas removal including hydrogen sulfide, sulfur dioxide, formaldehyde, ethylene, mercaptan and alcohol.

    • Bulk Granular Carbon and Zeolite
    • Model ACCS-BULK contains 25 pounds of coconut shell carbon in a 5 gallon pail
    • Model ACCP-BULK contains 25 pounds of coal pellet carbon in a 5 gallon pail
    • Model ZEO-BULK contains 40 pounds of zeolite in a 5 gallon pail
    • Model ZK6-BULK contains 40 pounds of zeolite with potassium permanganate in a 5 gallon pail

    V Bank Metal Filled Carbon Trays

    V bank trays filled with granular activated carbon are available in standard 12″ X 24″ and 24″ X 24″ dimensions, and 1″ or 2″ thickness.  Custom sized trays are available upon request.

    • Model VB2424-1 or Model VB2424-2
    • Model VB1224-1 or Model VB1224-2
    • Model VBSPEC1 or Model VBSPEC2

    Honeycomb Filters Granular Filled Carbon for Odor Removal

    Honeycomb filters filled with granular activated carbon or potassium permanganate are recommended for use in controlling light duty odors in commercial indoor air quality applications.

    Disposable Honeycomb Filter Models

    Available in a fill percent of 50% (higher fill is available upon request), this filter comes in two models, depending on your air filtration application

    Activated Carbon (Model HCC) utilizes granular activated carbons for general odor control and removal of volatile organic compounds.
    Potassium Permanganate (Model HCZK) utilizes granular potassium permanganate for gaseous contaminants including hydrogen sulfide, sulfur dioxide, formaldehyde, ethylene,mercaptan and alcohol; applications include cold fruit storage, compressor intakes, exhaust systems and general HVAC applications.

    Controlling Odor and Fume Contamination

    Honeycomb filters are constructed of corrugated kraft cell and surrounded by a metal frame of 0.016 aluminum, sealed with a dextrin adhesive. The media is held in the cells with a nylon tollegrill, and adhered to the cells with PVA. These filters can be manufactured in thicknesses of  3/8” 1/2″, 7/8″ and 1-7/8”. Honeycomb filters are not recommended for use in high humidity applications.

    Permatron – Coalescing Filters

    Coalescing Filters & Mist Eliminators

    Smoke and fumes are sub-micron particulate by-products created by manufacturing processes such as welding, rubber and plastic processing, high speed machining with coolants, tempering, and quenching.

    Assembly lines are equipped with source-capture industrial air filter systems to reduce the amount of mist, aerosols and fumes in the atmosphere. Often times, the mist pulled from the source will coalesce or unite into a hardened substance in the duct work and post a fire hazard.

    Coalescing filters, commonly called mist eliminators are also needed to capture oil mist found in return air of industrial machine shops and water droplets from cooling coils and evaporative media or unevaporated moisture downstream from humidifiers.

    Coalescing Mist Eliminator Filter Models

    Permatron coalescing filters are available in two models, depending on your filtration needs:

    • Metal Mesh Oil or Water Mist Eliminator (Model MME) is constructed of multiple layers of metal mesh, expanded through specified feeds to assure maximum filtration and internal loading capabilities.  The metal mesh media is supported within a 1″ or 2″ thick galvanized steel frame.
    • Synthetic Mist Eliminator (Model SME) is designed to utilize the natural affinity between plastics being processed and the plastics used in some of the washable media filter. Model SME filter has a stainless steel frame and contains variable layers of honeycombed, corrugated and tubular monofilament polypropylene media sandwiched between two structural outside panels, offering a significant surface area within the air filter for coalescing to occur.

    Tested in operation, Permatron’s synthetic coalescing air filter yielded 2.5 lbs. of “gunk” in eight hours and kept duct work free of buildup.

    Coalescing or Mist Elimator air filters can be custom designed and sized to fit any application specifications.  Wash with soap and water as needed.  Model MME and Model SME both carry a 5 year warranty.

    Permatron – Fan & Vent Filters

    PreVent® 3-Dimensional Bonnet Fan Guards Vent Caps Socks & Diffusers

    Protect equipment motors, workers and products from harmful airborne dust and contaminants with bonnet style, vent cap style, sock style and ceiling vent diffuser style equipment protection air filters.  Available in a  3-dimensional styles for use on circular fan guards, inlet or outlet vents to prevent possible contamination from dust, dirt, thread, lint, fibers and other irritating contaminates.

    PreVent 3D Filters Can Be Customized

    These filters contain 1 layer of washable electrostatic polypropylene media, black or white in color, custom sewn with vinyl edging, elastic cloth binding or sonic welded edges to fit over any sized air inlet or outlet.  Approximately 1/8″ thick, our PreVent 3-dimensional filters can be made in any size diameter, including over-sized for extra large outdoor HVAC equipment.

    Black polypropylene media is UV protected and can be used  for outdoor applications.  White polypropylene media is FDA approved for food processing applications and works well to meet AIB Food Safety audit and inspection dust collection & filtering device requirements.  Additional media (non-woven polyester or foam) can be added upon request to the filter configurations to increase arrestance efficiency.  Pull tabs and drawstrings can be added for easy access or hook/loop closures for wrap around style filter.

    PreVent 3D Styles Available in 5 Models:

    1.  Model BONNET fits over the circular front side of a fan guard grill to stop dust and dirt from blowing out into the environment.  Available in black or white polypropylene with elastic edging.
    2.  Model FANGUARD fits over the circular back side of a fan guard grill to stop dust and dirt from being drawn into the fan, features a center motor cut-out and hook/loop closure. Available in black or white electrostatic polypropylene with elastic edging.
    3.  Model VENTCAP can be made square or rectangular to fit ceiling or wall vents, finished with an elastic edge to hold in place. Standard height is 4″, custom height available upon request. Available in black or white electrostatic polypropylene.
    4.  Model SOCK is a drop down design for ceiling vents or rooftop exhausts. Available in black or white electrostatic polypropylene with elastic edging.
    5.  Model DIFFUSER fits on a drop down ceiling vent diffuser held in place with a standard metal grid panel system.  Vinyl edging contains magnetic attachment for easy installation and removal. Available in black or white electrostatic polypropylene. Flat faced vent diffuser can also be protected with our PreVent Model R filter with a rigid galvanized steel frame and magnetic stripping.

    PreVent air filters carry a 5 year warranty (extended warranty is available upon request).

    Permatron – Air Filter Media

    Bulk Air Filter Media & Service Rolls

    Permatron’s air filter media capabilities include material slitting, sheeting, die cutting, sonic welding, sewing, fabricating and assembly. Permatron works with a diverse selection of washable and disposable air filter materials or ‘media’. Permatron offers virtually unlimited options for air filter materials such as paper, fiberglass, bulk carbon, zeolite and more. Air filter media is available in rolls, by the linear yard or custom sized pads.Our most popular air filter materials are listed below and spec sheets can be downloaded from the bottom of this page.

    Activated Carbon Air Filter Media – Odor/Fume/Gas Removal

    Nonwoven polyester is impregnated with a finely ground activated carbon coating to increase the surface area available for adsorption, and heat-set to retain the activated carbon coatings even when the media is rinsed or vacuumed. A dual action air filter media for  particulate and odor/fume/gas removal.

    Aluminum Mesh Filter Media

    Model ALUMCOR Corrugated Aluminum is a single layer of 20 gauge media that has been pleated into .125″, .25″ or .625″ heights.
    Model ALUMMESHFLAT Aluminum Mesh is the same media as corrugated, only init’s original flat form.
    Model ALUM Bonded Aluminum is a three dimensional ,25″ or .625″ thick media that contains several layers of aluminum slit mesh bonded together to create different densities with hundreds of baffle-like surfaces.

    Polyester Air Filter Media

    Nonwoven polyester is a synthetic air filter media.  The fibers are randomly dispersed in all directions through an air laid web to form a uniform media of high strength and durability.  A high volume of contaminants can be trapped within the complete depth of fiber.

    • Model NWPE Dry Type Nonwoven Polyester is white media available in .25″, .50″ or .75″ thickness.
    • Model NWPEB/W Tack Type Nonwoven Polyester is blue and white media available in .50″, 1.0″ or 2.0″ thickness
    • Model PFLO PermaFlo® Rigid Polyester is a fantastic alternative to hogs hair media and a high performance, economical alternative to disposable air filters.
    Available in .50″ or 1.0″ thickness, PermaFlo blue polyester media is self-supporting and needs no frame.  The polyester fiber does not flake, shed or have sharp edges.  The polyester fibers are unaffected by moisture, and clean easily with water for long term use.  Media can be cut with scissors eliminating air by-pass.   PermaFlo has a bi-directional air flow, and is produced within standard manufacturing tolerances for dimension and weight.  Available in service rolls, as well as, standard and custom sized pads.

    Electrostatic Polypropylene Air Filter Media

    Polypropylene is a synthetic media that comes in a honeycomb weave type, various yarn diameters, and is available in black or natural color.   Used extensively within the air filtration industry as an open weave fabric that effectively removes airborne particulates through a combination of impingement and a triboelectric charge (static electricity does not utilize current and does not flow).  Electrostatic media features a triboelectric charge as an inherent property for an enhanced attraction of airborne particles, like iron filings to a magnet.

    Polypropylene is a petroleum industry by-product which has excellent strength and is very resistant to abrasion.  Excellent resistance to most acids and alkalies.  Good resistance to bleaches, solvents, aging, indirect sunlight and abrasion.  Not attacked by mildew, this media will not disintegrate, like other air filter medias. Polypropylene is an FDA approved component, and can be used in food processing applications.  Black polypropylene media is UV protected, and can be used in conjunction with UV lights.

    We offer a sonic sewn edge for polypropylene media.  The media can be cut to your custom size,and  sonic welded in single, double or triple layers with a clean finished edge in place of a vinyl binding frame.

    • Model WHC12, Model BHC12 is a 12 mil yarn type synthetic air filter media that comes in a honeycomb weave type, and available in black or natural white color.
    • Model WHC20 is a high loft 20 mil yarn type synthetic air filter media that comes in a honeycomb weave type, available in .50″ thick natural white color.
    • Model PCOOLMEDIA is a unique self supporting synthetic air filter media, .25″ thick with a corrugated weave type.  PermaCool material has a dense, 3 layer, waffle weave configuration, which enhances its filtration ability and creates a rigid and durable electrostatic air filter with the convenience of a cut-to-fit solution.  Unlike other filter media which may compress and restrict air flow, PermaCool retains its low resistance design after installation.  The air filtration media can be rinsed or vacuum cleaned, and will not degrade over time as foam does.
    • Foam Air Filter Media
    • Foam is thermally reticulated 15 and 20 pores per inch polyether polyurethane foam.  Resilient and flexible, foam air filter media is reusable and can be rinsed with water or vacuum cleaned. Charcoal in color, the media comes in several thicknesses.  Media is available in rolls and cut to size pieces.
    • Model FOAM-20 is a .25″ or .50″ thick 20 PPI filter material, charcoal in color.
    • Model FOAM-15 is a .375″ thick 15 PPI filter material, charcoal in color.
    • Plastic Netting
    • Rigid black plastic netting with 3/8″ diamond shape openings can be used as a protective barrier against environmental elements, nesting birds, and  hail storms or layered as filter media support in air filters.  UV protected, rot and corrosion resistant for outdoor use.
    • Model HailStop50
    • PVC Coated High Abrasion Screen Media
    • Black 9×9 1000 denier multi-polymer coated polyester mesh.  UV protected, rot and corrosion resistant for outdoor use. High grab tensile strength MD115/CD 105-ASTM D 4632 Test Method;  High trapezoid tear strength MD 55/CD 40-ASTM D 4633 Test Method. Mullen burst strength 240-ASTM D 3786 Test Method.
    • Model BHA
    • Pad Stabilizing Frames
    • Metal pad stabilizing frames are available in galvanized steel frame with expanded metal support grid on one side. This can be used in air filtration applications involving media pad change outs. The filter frame is available with or without 2 criss crossed wire supports to hold the air filter media in place.
    • Pad Stabilizing Frames Available in 2 Models
    • Model STAB is constructed of  .02 gauge galvanized steel, 1/2″, 1″ or 2″ thickness
    • Model STABHD is constructed of  heavy duty 24 gauge galvanized steel, 1/2″, 1″ or 2″ thickness

    Nu-Calgon Products

    Bruce Air Filter Company carries a wide variety of Nu-Calgon products.  Please see the Nu-Calgon Product Catalog PDF for a full view.

    (PDF from Specialty Products Brochures PDF)

    Nu-Calgon PanPads

    The product is a quaternary-based biocide, formulated in tablet form and enclosed in a plastic housing which in turn is sealed ultrasonically to an absorbent white filter pad. Water is absorbed by the pad and “wicked” to the tablet, resulting in the immediate, but controlled, release of the powerful biocide. PanPads can be used in any condensate pan arrangements, either horizontally or vertically. Their low profile fits most pan configurations, and they last three months or more. Formulated buffering agents help protect pan against corrosion. When used as part of the Clean Coil Program, equipment is assured of optimum performance at the lowest possible energy cost.

    Air conditioning and refrigeration evaporator or cooling coils cool the air that is brought across them. In the process, moisture can be removed from the air, resulting in condensate. This condensate is collected in the condensate pan and drained away. Without proper treatment, bacteria can begin to grow in the pan, clogging the drain hole and resulting in overflow. In addition, this bacteria can also cause musty odors as well as respiratory ailments, contributing to an indoor air quality (IAQ) problem. Use of PanPadskills this bacteria, preventing these problems.

    Packaging SizeAdditional Info.

    PanPads-5 Slim Treats up to 5 tons

    PanPads-5​​Treats up to 5 tons

    PanPads-15​​Treats up to 15 tons

    PanPads-45​​Treats up to 45 tons

    Nu-Calgon Pan-Treat

    Pan-Treat condensate tablets control odors can prevent overflows by plugged condensate drain lines. They can also be used on humidifiers. Pan-Treat is extremely easy to use, and is safe, non-corrosive, non-toxic and biodegradable. The product is completely soluble in water and it does not form any deposits in the pan or drain.

    Left untreated, condensate pans can suffer from the build-up of sludge, scum and other accumulations. This build-up can cause odors as well as plugged drains and overflows, which in turn result in water damage. Pan-Treat is formulated with ingredients proven effective in cleaning and preventing these deposits, and its use will eliminate the extra maintenance costs associated with odors, plugged drains and overflows.

    1 bottle (200 tablets)

    Timken Products

    Bruce Air Filter Company carries a variety of Timken Belts.  Please see the PDF for a complete product catalog.  If you are interested in learning more, please feel free to reach us via email or phone.

    CLICK HERE FOR .PDF CATALOG