Air Solution Company


Standard Duty Filters

  • Includes: Standard Duty Commercial Mesh, Standard Fiber Reinforced Outer Binding and Choice of Standard Duty, Quick Release Nylon Toggle Fasteners, Self-tapping Screws & Bonded Washers or Nylon Zip Ties.
  • Ideal For: use on all condenser and chiller coils, Louvers and air handling units. Excellent rooftop unit (RTU’s) air intake filters.
  • Extraordinary low static pressure impact at low and high air volume & velocities

Fine Mesh Grade Commercial Filters

  • Includes: Fine Mesh with Fiber Reinforced Outer Binding and Choice of Durable, Quick Release Nylon Toggle or Twist Lock Fasteners or, Self-tapping Screws with Bonded Washers.
  • Ideal For: Machine Motor Air Intake Housings and HVAC Systems (e.g., spot cooler condenser coils, fan motors, etc).
  • Not Recommended for use in regions with heavy cottonwood seed unless also accompanied by excessive high dust. Refer to Dual-Ply Filters if equipment is subject to impact by extensive dust and cottonwood seed.

Medium Duty Commercial Grade Filters

  • Includes: Engineered HVAC Mesh with an Outer Hem and Heavy Duty, Fiber Reinforced Vinyl Strip Sandwiched between Hems. Commercial Grade Grommets with Quick Release Twist Lock (1/4 Turn Stud) Fasteners or Self-tapping Screws and Bonded Washer Fasteners.
  • Ideal For: all louvers, rooftop units , air handling units and some cooling towers. Makes excellent RTU air intake screens.
  • Extraordinary low static pressure impact at low and high air volume & velocities

Heavy Duty Commercial Grade Filters

  • Includes: Engineered HVAC Mesh with 1.125” Heavy Duty Fiber Reinforced Outer Binding and Choice of Durable Quick Release Nylon Twist Lock Fasteners or, Self-tapping Screws & Bonded Washers or Nylon Zip Ties.
  • Ideal For: all louvers, rooftop units (RTU’s), air handling units and some evaporative condensers and cooling towers. Makes excellent RTU air inlet screens.
  • Extraordinary low static pressure impact at low and high air volume & velocities

Industrial Grade Filters

  • Includes: Engineered HVAC Mesh, 2.25” Heavy Duty, Fiber Reinforced Outer Binding, Industrial Grade Grommets and Heavy Duty, Self-tapping Stud Adapter Fasteners (Fastens to Steel & Masonry).
  • Ideal For: use on all packaged and In-ground field erected cooling towers, evaporative condenser units and large tonnage air cooled chillers & condenser units.
  • Extraordinary low static pressure impact at low and high air volume & velocities

Dual Ply Filters

  • Includes: Heavy Duty, Fiber Reinforced Outer Binding with any combination of Commercial Duty, Industrial and Fine Mesh Media. Two plys are bound together to create a single multi-ply filter.
  • Ideal For: applications where cottonwood seed, insects, etc., is accompanied by excessive dust. Also, ideal for helping to reduce snow buildup in duct & air chambers during winter periods.

Stackable Dual Ply Filters

  • Includes: Heavy Duty, Fiber Reinforced Outer Binding with Quick Release Nylon Toggle Fasteners or Self-Tapping Screws & Bonded Washer Fasteners and any combination of Commercial Duty, Industrial and Fine Mesh Media. Two or more plies are produced as individual filters that can be stacked on top of one another using common fasteners. This option enables greater flexibility and ease of cleaning vs. the non- stackable dual-ply product. Available Fasteners are Toggle Fasteners or Industrial Grade Stud Adapter Fasteners.
  • Ideal For: applications where cottonwood seed, insects, etc., is accompanied by excessive dust. Also, ideal for helping to reduce snow buildup in duct & air chambers during winter periods.

Slide Mount Filter System

  • Includes: Heavy Duty Industrial Grade Filter, Hardware and Cable Mounting Assembly. This Filter Slides Like A Curtain and includes Velcro Bundle Straps To Hold Filters Neatly Bundle to the Side During Storage Periods.
  • Ideal For: Medium and Large Tonnage Air Cooled Chillers and Condensers up to 8ft. high and small to mid size cooling towers

Roller Track Filter System

  • Includes: Heavy Duty Industrial Grade Filter, Roller Hooks, Heavy Duty Galvanized Track and Mounting Hardware and Velcro Bundle Straps to Hold Filters Neatly To One Side During Storage. This Filter Glides Along the Track Like A Curtain to Open and Close.
  • Ideal For: Medium and Large Tonnage Air Cooled Chillers, Condensers and Large Cooling Towers or intake openings.

Industrial Pulley Mount Filter System

  • Includes: Engineered Industrial HVAC Mesh, Cables & Pulley Assembly, and Pulley Rope &Mounting Hardware. Available with Choice of Bundle Straps for off season storage, Vinyl Cover or Integrated Galvanized Storage Box with Turn Lock Cover.
  • Ideal For: Large Cooling Towers and Intake Openings that require fast set-up or take down at the beginning & end of the season.

Quick Release / Fixed Mounted Fasteners

Standard Duty Toggle Fasteners

Commercial Duty Twist Lock Fasteners (1/4 Turn Studs)

Industrial Duty Stud Adapter Fasteners

Self-tapping Screws with Bonded Washer Fasteners

Nylon Zip Ties

Roller Track Mounting System
The Roller Track System Is Designed To Enable Easy Opening and Closing as You Move the Filter From Side To Side. The Mounting System Includes Heavy Duty Galvanized Track and Mounting Brackets, and Durable Roller Hooks made of Stainless Steel with Nylon Rollers and End Caps to Contain the Hooks onto the Track.

Pulley Mount System
Click the link below to see a YouTube video demonstrating how easy it is to use. Pulley Mount Air Inlet Filter Screen

Hail Master Mesh Screen
This semi-rigid mesh hail screen is highly durable and will provide protection from hail and other airborne objects. When used with the track mount kit and cottonwood filter screen – you will provide your equipment with optimal protection giving you “peace of mind” that your equipment is protected and performing to specification.

Track and Mounting Options

  • PVC

Track and Mounting Options

  • clear anodized coated aluminum

Track Connectors – Corner Connector
Use of corner connectors enable track to be assembled into a rigid frame that can attach directly to the surround of a condenser coil opening. The track creates an additional .75″ stand-off away from the outer surface of the unit – thus helping to enhance coil protection. For internal filter applications, the rigid frame can accommodate different filter grades and be slid into an internal filter rack as a pre-filter which will protect pleated and box style filters as a Pre-filter.

Track Connectors – “T” Connector
“T” Connectors are used to connect lengths of track end to end or to create middle supports across the width of an intake opening thus providing lateral support under the flow of air. When using the Cut Mesh Filter Screens (available as an add-on to the three Hail Master Kits) you can field insert grommets down the center support to provide even greater strength and stability.